Jump to content
SAU Community

Recommended Posts

OK - newbie questions coming up:

I'm thinking of upgrading from the standard steering wheel for my '93 R33 GTS, but I have no idea whether there is anything I should be looking out for in particular - is there anything that I need to make sure the new wheel has? Will I need anything additional to the wheel? Where would be the best place to take it to get fitted (preferably on the Sunny Coast), or is it fairly straight forward to do it yourself?

I've seen a few steering wheels on ebay, but I'm a bit worried they might be dodgy or just cheap crap - what's the major difference between cheap steering wheels (<$100) and the more expensive Momo or Sparco wheels (> $300)?

What are boss kits, and will I need one if I upgrade??

And finally, does this look like a crap steering wheel?

http://cgi.ebay.com.au/NEW-NISSAN-NISMO-T1...1QQcmdZViewItem

Thanks!!!

Link to comment
https://www.sau.com.au/forums/topic/125456-steering-wheels/
Share on other sites

A boss kit is needed to bolt the wheel onto the steering column and allow the horn to still work, with the standard wheel the boss and the steering wheel are combined as one unit.

That one looks okayish, but a little garish for my tastes.. Simple designs look better IMO . Go with a momo / sparco or even a saas /autotechnica one from the likes of autobarn (or ebay). The more expensive ones are better made with higher quality materials, so paint wont flake off, rust, will be real leather etc... and also are engineered to design standards.

Important to note ADR10 relating to steering wheels, basically you can only go as small as 35cm in diameter as you still need to be able to see your gauges. I have a 32cm momo wheel and got defected for it. Its still on the car because i like it too much :)

Link to comment
https://www.sau.com.au/forums/topic/125456-steering-wheels/#findComment-2316388
Share on other sites

was an option on s1 r33 :)

Also, i dont know how they can fine you. Yes its illegal if the car originally had airbags but i'm not sure what year the law was bought in (ie: a 94 that had drivers airbag may be excempt anyway) but more to the point how wiill they know unless they can decipher the vin number to get the factory options or something?? (assuming you dont have a big red airbag warning light lit up on your dash too lol )

Link to comment
https://www.sau.com.au/forums/topic/125456-steering-wheels/#findComment-2316411
Share on other sites

Hey insomniac,

I get my 94 model 33 in under a month and i have been doing the research on steering wheels as well =) i also live on the coast, so we should go for a cruise! :)

So yeh, any import with a factory steering wheel fitted with an airbag that is replaced with a steering wheel without is grounds for a defect.

However, i dont like the 93/94 model steering wheels in the 33's, so mine is coming off and ill be taking the risk :)

Same with the gear knob.

Link to comment
https://www.sau.com.au/forums/topic/125456-steering-wheels/#findComment-2317824
Share on other sites

Hey insomniac,

I get my 94 model 33 in under a month and i have been doing the research on steering wheels as well =) i also live on the coast, so we should go for a cruise! :(

No problem Sambo - let me know when you're ready to go and we'll sort something out. I know how excited you get when you first receive your new toy! Be prepared for lotsa money being poured into it though! :D

Where abouts on the coast are ya?

Link to comment
https://www.sau.com.au/forums/topic/125456-steering-wheels/#findComment-2317926
Share on other sites

Yeh man, ever since the car has been paid for ive been checking my watch every 5 minutes hey >.< !!

Im at the very top of buderim, so its not far to jump on the motorway or down the back way through maroochydore for a cruise :D

Can't wait man :(

Link to comment
https://www.sau.com.au/forums/topic/125456-steering-wheels/#findComment-2317947
Share on other sites

changing the steering wheel is something you can do yourself, with usually a ratchet and screwdriver

What the difference between cheap and expensive wheels? usually, just a brand name. I bought a $100 wheen new from ebay - its leather and alloy and built strong. no, it doesn't have a brand name, but who cares? see attached pic...

what's a boss kit?

well its basically a piece of metal that, on one end, bolts to your particular model of car. on the other end, it has a series of holes that bolt up to almost any aftermarket steering wheel. So you need on specific for your car, but any universal steering wheel will work

In summary: buy a cheap ebay wheel if its new from an ebay store and you will have no problems at all!

my wheel: http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...me=STRK:MEWN:IT

post-2094-1152511309.jpg

Link to comment
https://www.sau.com.au/forums/topic/125456-steering-wheels/#findComment-2318048
Share on other sites

there's a sensor on the steerign column that is moved when the steering wheel is moved.. so hicas knows where you're turning the steerign wheel and can assist you appropriately by turning the rear wheels in the correct direction

have changed my wheel a couple of time but never seen it, must be behind the boss.

Link to comment
https://www.sau.com.au/forums/topic/125456-steering-wheels/#findComment-2318259
Share on other sites

yeah behind the boss...

pull off your aftermarket wheel tyo reveal the boss

pull off the boss (remove the large inner nut) and reveal 2 items

1 * horn plug with a wire that runs up to your horn

1 * hicas sensor that slides into the boss kit to be turned when the steering wheel turns

:(

Link to comment
https://www.sau.com.au/forums/topic/125456-steering-wheels/#findComment-2318276
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...