Jump to content
SAU Community

4 Channel Temperature Display

MearCat

By MearCat,
in Group Buys

 Share

Recommended Posts

MearCat Proficient

MearCat

Posted
  • Author
Posted

Just out of interest for all, I've just delivered a customised version to a Perth performance workshop (Hyperdrive) last week for their drift car. Customised to measure 4 x EGTs with data logging 8 times per second - to be used when they are tuning it. This gives a good indication that this unit is not just for the streeter. Also, I am currently looking into a design of remotely mounting the LCD from the main circuit board for those people doing track work and want to have the LCD in direct view of the driver.

MearCat Proficient

MearCat

Posted
  • Author
Posted
Do the air temp sensor probes use the same type of compression gland as the EGT thermocouple?

What sort of thermocouple to use in that sandwich plate for oil temp, can you supply?

All the thermocouples I supply are all exactly the same design (the EGT thermocouple has a higher temp range though) and use the same 1/8" BSP brass compression gland. In the first page on this thread, there is a pic of them (Thermocouple Pic). When the brass compression gland is fitted, the probe extends out 35mm past the compression gland which is sufficient exposure into any piping or sandwich plate.

  • 1 month later...
Edge Proficient

Edge

Posted
Posted

Do you have the following in stock ready for my order at this time?

In car display showing

2 x air temp (0-250), 1 x oil temp (0-250), 1 x exhaust gas temp (0-1000)

4 x 0-250 thermocouples (want an extra one)

1 x 0-1000 thermocouple

5 x 1/8" Brass Compression glands

MearCat Proficient

MearCat

Posted
  • Author
Posted
Do you have the following in stock ready for my order at this time?

In car display showing

2 x air temp (0-250), 1 x oil temp (0-250), 1 x exhaust gas temp (0-1000)

4 x 0-250 thermocouples (want an extra one)

1 x 0-1000 thermocouple

5 x 1/8" Brass Compression glands

Yes - I currently have 7 kits in stock and heaps of thermocouples & compression glands available. PM Sent to you...

  • 4 weeks later...
MearCat Proficient

MearCat

Posted
  • Author
Posted

Sorry about that. I'm rearranging my webspace. Pics and links have been updated. Otherwise, go to http://www.mearcat.com.au/Kits for the pics and links to user manual and other kits are coming...

NYTSKY Grand Master

NYTSKY

Posted
Posted
Yeah, I'd like to start fitting the bits now to interface to your contollers, so PM me with the kit of four sensors.

so Airbox, turbo out, Manifold in, and Exhaust gas.

lots of air temp probes!

Hey i think i saw a video of yours on youtube.Nice skid pan work.What mods do you have.Sounds like you have a bit of power.

  • 4 weeks later...
MearCat Proficient

MearCat

Posted
  • Author
Posted

Until end of Feb, these kits will available for 15% off - a saving of $75. the full kit including the main unit and 4 thermocouples is available for $420.

Email or PM me if you are interested.

  • 3 weeks later...
MearCat Proficient

MearCat

Posted
  • Author
Posted
sounds good will want one in a couple of weeks

Please email me your details and I will note them down so that receive the 15% discount (even if you order in early March).

-Alan

  • 5 months later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Blue slip

      By PranK · Posted

    • GTSBoy
      Ethanol Content Sensor - Always at 11%?

      By GTSBoy · Posted

      But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • GTSBoy
      Blue slip

      By GTSBoy · Posted

      Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Dose Pipe Sutututu
      Blue slip

      By Dose Pipe Sutututu · Posted

      Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Stringycheese
      Blue slip

      By Stringycheese · Posted

      Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
×
×
  • Create New...