Jump to content
SAU Community

Recommended Posts

fin.JPG

2 : Our Universal Hybrid GT Spec Intercooler is using our latest Tube & Fin structure, unlike the Bar & Plate structure, the tube design is one whole piece. We stopped production of the Drift Spec Bar & Plate Universal Hybrid Intercooler since 30-6-2005.

3 : Our Universal Hybrid GT Spec Intercooler has highly polished endtanks, 3" inlet and outlet size for the maximum flow. not 2.5" on the fake ones.

4 : Our Hybrid GT Spec Tube & Fin intercooler is developed with our latest technology, it is only approx. 6.2 kgs, the fake ones are extremely heavy and up to 12 kgs. The fake one is much more heavier and making your car lose power, it just doesnt make any sense at all.

clamp.JPG

5 : All Hybrid clamps are made in T304 stainless steel with the latest T-bolt clamping mechanism. All Hybrid clamps have Hybrid logo stamped on. Unlike the fake ones, our clamps have no slots, so it wont damage the silicone hoses. Except the 1.5", 2" and 2.25" clamps.

pipe.JPG

6 : Our Hybrid clamps sizes are according to the diameter of the pipe together with the thickness of the silicone hoses. The fake kits have all the wrong sized clamps that cant even be put on the hoses, very dodgy. It is because the manufacturers of the fakes dont even have the slightest idea of the items that they are manufacturing, absolutely no research & development were put to make the item work.

hose.JPG

7 : All Hybrid reinforced silicone hoses are shiny blue colour, wall thickness is approx. 3.5mm with 3 layers of reinforcement. Not rubber hoses the fake ones are using, rubber hose is soft and will expand when hot, eventually causing the hose to pop out and cause engine damage.

I need one for my R34 GT-T got any in stock?

yes, we have the Skyline Hybrid kit in tock. please ket us know asap as we are ending the hybrid promotion this week.



  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...