Jump to content
SAU Community

Using I-pod

stagon

By stagon,
in Four Door Family & Wagoneers

 Share

Recommended Posts

stagon Apprentice

stagon

Posted
Posted

Hi all,

just wondering if there is any way of hooking up an i-pod to the stock TV Nissan decks. It has an audio and video input at the front but I can’t seem to find a channel to run it on. Might have to change deck but want to waste money on engine mods first!!

Any suggestions?

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/
Share on other sites
stasis Mentor

stasis

Posted
Posted
Hi all,

just wondering if there is any way of hooking up an i-pod to the stock TV Nissan decks. It has an audio and video input at the front but I can’t seem to find a channel to run it on. Might have to change deck but want to waste money on engine mods first!!

Any suggestions?

are there any input selector on the deck? If its an external plug in like in front of the fase it should be AUX isnt it?

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2331446
Share on other sites
mcnamg Veteran

mcnamg

Posted
Posted

no pictures am I missing something?

I think there is a control unti under the passenger seat might be some inputs on it. They may be RCA though so a 2rca to 3.5mm adaptor may be required otherwise it may be in the boot I cant remember there was a thread about this a while ago I think not about ipods mind but about the inputs

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2331536
Share on other sites
stasis Mentor

stasis

Posted
Posted
here is a picture. i have a navigation system. could this be using the AUX channel. as it is no good to me i am going to disconnect it?

that i dont know where the nav is connected to. try to fiddle it if you cant bring it to an autoelec and see how much he will charge you for it and pay cash

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2331538
Share on other sites
stasis Mentor

stasis

Posted
Posted
not sure how to put a picture up. just audio in and video in on side of screen. will check under seat to see what i can find. im sick of listening to AM radio

thanks

if you got an inpu of videa and audio it should work though. just have to find the right input in your selector.

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2331554
Share on other sites
munchstagea Mentor

munchstagea

Posted
Posted

The tuner unit is in the rear quater panel on the passenger side and has an extra set of RCA inputs on it, that's what mine is like anyway. If you select VTR1 through the head I expect that is where the extra RCAs point at so with the right conections this may work... Not 100% sure if it will though...

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2331650
Share on other sites
mcnamg Veteran

mcnamg

Posted
Posted

as long as you can find the inputs ie 2 rca inputs then you will be fine. any a/v store will sell adaptors dick smith tandy harvey norman etc what you are looking for as i said before is 2rca (ie left and right) to 3.5mm adaptor.

If it is not rca then it will most likely be a 3.5mm jack then all you need is 3.5mm to 3.5mm or worst case 2.5mm to 3.5mm otherwise I am all outa ideas

good luck

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2331765
Share on other sites
stagon Apprentice

stagon

Posted
  • Author
Posted

took head unit out today. put a converter in so i can get fm channels (easy to do with good results). heaps of wires at the back tried plugging ipod into all of them. cant seem to get it working. when i get my alarm put on i will get the guy to have a look at it for me. currently i was using a 3.5 - 3.5mm cable and putting it in audio in. cant seem to be able to find an aux channel to run it on. have a cd/vcd stacker i want wired in as well so i can play cd's and hopefully watch movies on screen. if not deck is going in bin!!

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2332677
Share on other sites
munchstagea Mentor

munchstagea

Posted
Posted
took head unit out today. put a converter in so i can get fm channels (easy to do with good results). heaps of wires at the back tried plugging ipod into all of them. cant seem to get it working. when i get my alarm put on i will get the guy to have a look at it for me. currently i was using a 3.5 - 3.5mm cable and putting it in audio in. cant seem to be able to find an aux channel to run it on. have a cd/vcd stacker i want wired in as well so i can play cd's and hopefully watch movies on screen. if not deck is going in bin!!

Hi Ben,

That last bit can be done but not that simple see here

Cheers

Luke

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2333558
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • R34_GT to Turbo
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By R34_GT to Turbo · Posted

      Ok so will run the piping over that radiator and no plenum it is. Put that money towards a Haltech and see what suits. Any ideas something like an elite 2000 or 2500 right? My long term goal is 300kw e85 and manual swap and that’s a dream come true. For now will be 200kw and auto the stock rb25det neo intake isn’t too expensive with throttle body. If I was to have the port matching done, Would that be better than the stock de intake as the det has bigger holes plus has the spots for sensors etc? And suit more long term?  appreciate the advice?   
    • MBS206
      R33 GTR running -9 with no tune

      By MBS206 · Posted

      You understand AFR is not the only thing that contributes to it pinging yeah? Funnily, what the AFR gauge will tell you when it likely is pinging, is going to make you think things are really safe and good.
    • MBS206
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By MBS206 · Posted

      Run the piping how we all have for decades. Also the duel runners with the +T setup dramatically helps it gets on boost quicker. Yes, chase huge power it'll become a problem, but you're a long way off when you're already saying an aftermarket ECU is out of the budget. You also say NisTune as it's simple, and then immediately say it'll be painful, meaning... It won't be simple. It will likely cost you a lot more stuffing around with a Nistune, than just putting a Haltech or similar in.
    • 677_GTR
      R33 GTR running -9 with no tune

      By 677_GTR · Posted

      I’ll order an afr gauge to keep an eye on it.  Then will get a haltech soon 
    • R34_GT to Turbo
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By R34_GT to Turbo · Posted

      TD05 or maybe pulsar PSR2867r Gen 2?  id love a garret but it’s quite out the budget for now and I’m not chasing crazy power.    yeh fuel pump haven’t looked into but whatever works, kind of last on my list.    Nistune because it’s simple but Ik it’s a lot of pain especially as I’m auto +t with the whole seperate TCM etc still investigating that. Haltech id love but once budget tight for now atleast.    finally the reason I’m trying for a plenum instead of the stock intake is I already have a standard Intercooler mounted etc. so the ports are on both sides so trying to not have to go over the clutch fan radiator etc. trying to find a good deal return flow if I don’t than this will do for now I guess. btw any ideas with that, apparently some people have to cut blades to reduce it from hitting the Intercooler piping over the radiator ? Thanks 
×
×
  • Create New...