Jump to content
SAU Community

Using I-pod

stagon

By stagon,
in Four Door Family & Wagoneers

 Share

Recommended Posts

stagon Apprentice

stagon

Posted
Posted

Hi all,

just wondering if there is any way of hooking up an i-pod to the stock TV Nissan decks. It has an audio and video input at the front but I can’t seem to find a channel to run it on. Might have to change deck but want to waste money on engine mods first!!

Any suggestions?

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/
Share on other sites
stasis Mentor

stasis

Posted
Posted
Hi all,

just wondering if there is any way of hooking up an i-pod to the stock TV Nissan decks. It has an audio and video input at the front but I can’t seem to find a channel to run it on. Might have to change deck but want to waste money on engine mods first!!

Any suggestions?

are there any input selector on the deck? If its an external plug in like in front of the fase it should be AUX isnt it?

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2331446
Share on other sites
mcnamg Veteran

mcnamg

Posted
Posted

no pictures am I missing something?

I think there is a control unti under the passenger seat might be some inputs on it. They may be RCA though so a 2rca to 3.5mm adaptor may be required otherwise it may be in the boot I cant remember there was a thread about this a while ago I think not about ipods mind but about the inputs

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2331536
Share on other sites
stasis Mentor

stasis

Posted
Posted
here is a picture. i have a navigation system. could this be using the AUX channel. as it is no good to me i am going to disconnect it?

that i dont know where the nav is connected to. try to fiddle it if you cant bring it to an autoelec and see how much he will charge you for it and pay cash

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2331538
Share on other sites
stasis Mentor

stasis

Posted
Posted
not sure how to put a picture up. just audio in and video in on side of screen. will check under seat to see what i can find. im sick of listening to AM radio

thanks

if you got an inpu of videa and audio it should work though. just have to find the right input in your selector.

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2331554
Share on other sites
munchstagea Mentor

munchstagea

Posted
Posted

The tuner unit is in the rear quater panel on the passenger side and has an extra set of RCA inputs on it, that's what mine is like anyway. If you select VTR1 through the head I expect that is where the extra RCAs point at so with the right conections this may work... Not 100% sure if it will though...

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2331650
Share on other sites
mcnamg Veteran

mcnamg

Posted
Posted

as long as you can find the inputs ie 2 rca inputs then you will be fine. any a/v store will sell adaptors dick smith tandy harvey norman etc what you are looking for as i said before is 2rca (ie left and right) to 3.5mm adaptor.

If it is not rca then it will most likely be a 3.5mm jack then all you need is 3.5mm to 3.5mm or worst case 2.5mm to 3.5mm otherwise I am all outa ideas

good luck

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2331765
Share on other sites
stagon Apprentice

stagon

Posted
  • Author
Posted

took head unit out today. put a converter in so i can get fm channels (easy to do with good results). heaps of wires at the back tried plugging ipod into all of them. cant seem to get it working. when i get my alarm put on i will get the guy to have a look at it for me. currently i was using a 3.5 - 3.5mm cable and putting it in audio in. cant seem to be able to find an aux channel to run it on. have a cd/vcd stacker i want wired in as well so i can play cd's and hopefully watch movies on screen. if not deck is going in bin!!

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2332677
Share on other sites
munchstagea Mentor

munchstagea

Posted
Posted
took head unit out today. put a converter in so i can get fm channels (easy to do with good results). heaps of wires at the back tried plugging ipod into all of them. cant seem to get it working. when i get my alarm put on i will get the guy to have a look at it for me. currently i was using a 3.5 - 3.5mm cable and putting it in audio in. cant seem to be able to find an aux channel to run it on. have a cd/vcd stacker i want wired in as well so i can play cd's and hopefully watch movies on screen. if not deck is going in bin!!

Hi Ben,

That last bit can be done but not that simple see here

Cheers

Luke

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2333558
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      I transferred from full time service to Army Reserve, so I still have access, work has been super keen to get me in to work in the OPS realm, so just turning up to use the gym......and ovens, isn't causing any issues, apart from me needing to keep on telling them that I won't be doing any reserve days until I get my joint in Goulburn sorted  Basically I can now work whenever I want, for how long I want now, and it's all tax free Next time we have some fires or floods you might see me covered in mud, or cutting sick in some plant equipment cleaning up, the Reserves love getting in the news, LOL
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Final finish outcome of 80°c was typical to the pics, I've turned the oven down to 50°c and will pick them up after the gym tomorrow  The before and after difference was amazing, the wrinkle paint has covered all of the casting marks completely It did take a couple of hours to key it all and get in all of the crevices, but, for me it was time well spent for the final outcome, but I have all the time in the world to do it at the moment  Ended up with 4 coats, each sprayed at different angles to get optimal coverage and thickness As for the fixtures and intake box thingo that hasn't made it, the supplier is apparently posting the fixtures, and, are now sending a different CAI that is in stock The replacement CAI is actually better than what I originally ordered, but will require a pod filter that locates under the front bar, still serviceable, but it basically removes the whole OEM filter box and ducts into the front bar, so filter cleaning will require ramps and the removal of some front bar undertray, not a war stopper, just some ramps and an additional 10 minutes work every few months From looking at it it is made from alloy pipe from the throttle body, through the CAI hole in the rad support, then right turning under the bar, luckily the wrinkle paint was on special and I got 2 cans for $30ish, so the alloy will get the same wrinkle treatment as the intake manifold, hopefully it turns up soon, either way, the car will be getting booked in soon, if the parts aren't here, I'll just get MX5 Mania to " make it work"  
    • MBS206
      NC MX5

      By MBS206 · Posted

      I'm so glad base security is so high. I see they stopped some random codger from being able to just wander in off the street... 😛   PS, intake looks good!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So far so good, another hour and their done
    • RA708
      Is there a good place to learn how an engine works online?

      By RA708 · Posted

      Exactly how each part works and how they all work together to make the engine function. That's all I'd need to do a basic build. Maybe how forced induction works. I probably need to learn some of the maths behind it all as well.
×
×
  • Create New...