Jump to content
SAU Community

Recommended Posts

I have from an unfinished project a large Turbo KKK built by BLITZ.

Turbo was prepared for RB25 engine but was never started and the project was never completed. It looks used but never been run, inside is brand new condition clean inside even it doesnt look it from outside as it was customised for engine bay (piping welded on for air intake, intercooler etc), absolutely no shaft play no movement , Taken to a performance workshop they told me the turbo is rated at atleast 600 hp.

Turbo comes with a RB manifold ready to bolt on to your R32, R33, This can be separated

This is a great upgrade for Twin turbo engines into a single turbo such as RB26, 1jz, 2jz etc or an excellent upgrade for RB20 RB25 RB30/25-26 but probably too big for SR20 not too sure.

can post more pics upon request

Tag of turbo: 3LKS-321 it has a few more numbers there but not sure which one is most important, i can provide them by further request.

$ 1450 including manifold and a braided oil line.

post-18510-1153838236.jpg

post-18510-1153838481.jpg

Edited by familka gtr

sorry pictures didnt load up before here they are, i will put on more pics of it tomorrow all cleaned up and shiny and also from the exhaust housing etc. the manifold is also made from very thick steam pipe.

post-18510-1153922197.jpg

post-18510-1153922292.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...