Jump to content
SAU Community

Recommended Posts

Hey guys,

I installed an R32 GTS-T Hybrid Intercooler kit (600x300x76) and well... after some hard driving the other night, the engine bay was hot as all... **** but the pipes were AT MOST 4 degrees C... but when compared to the stock piping, which you still use a little bit of, it was still kind of hot, but maybe that was about 10 degrees C. So, FMIC... Highly Recommended!!!!

Installed it with the help of a mate in my garage, and did the front bar myself (Very time consuming)...

NEED TO CUT A LOT OF THE Standard Front Bar to fit it back on! NOTE: kit was for a R32 (RB20DET) NOT Cefiro.

Please excuse the dirty drift pig look :D

post-19602-1154127527.jpg

post-19602-1154127658.jpg

Edited by QUIKBLADE
Link to comment
https://www.sau.com.au/forums/topic/128001-reason-for-front-bar-coming-off/
Share on other sites

  • 2 weeks later...
nice ceffy but i think you need to keep cutting as the opening doesnt quite look right

What do you mean?... An aftermarket front bar would be nice, but cash... ya know... Plus the lack of EVERYTHING except for URAS and URAS style bodykits, which IMHO look well tacky!...

I used to have what appeared to be the same front bumper/bar as you, but recently changed it...

DUDE, I've been looking for that EXACT same bar for ages...only place I found on was on the Japan Auctions (Yahoo)... Where'd you get it?... Yeah Looks like we both had the stock bar, but modified it accordingly... I tried to make it look like it "fit in" with the car, and a bit Jap Spec, so cut the numberplate part out, and 'relocated' the plate to one side (j-spec :P) Nice car man :P

PLUS, for those who've not had a standard bar to work with... that sucker from the number plate cuts back in to the body SO far it's insane... probably on a 60 degree angle, back in towards to main body of car... hence why FMICs look massive on these cars, with standard cut bars.

Edited by QUIKBLADE
DUDE, I've been looking for that EXACT same bar for ages...only place I found on was on the Japan Auctions (Yahoo)... Where'd you get it?... Yeah Looks like we both had the stock bar, but modified it accordingly... I tried to make it look like it "fit in" with the car, and a bit Jap Spec, so cut the numberplate part out, and 'relocated' the plate to one side (j-spec :P)

I'm actually in Thailand, where there are lots of bodyshops that have every different style of bodykit imaginable..... so I know it doesn't help your search to find it in Australia.

Mine is a fiberglass copy, which while being very cheap - isn't a perfect fit. The bodyshop got quite $hitty about it when I complained it didn't fit perfectly, but I think I can modify it to make it fit slightly better - so if you are going for a copy, be very careful and trial fit it [and modify accordingly] before its painted.

Nice car man :P

Thanks for the positive comment... I like it a lot. Here's another photo

post-29700-1155347647.jpg

I think it makes a huge difference to how the car looks, and it makes the FMIC look huge. I haven't decided yet where to move the number plate to, so its still sitting on my dashboard.

I've noticed that I get lots of looks from people checking the car out. I work at a university and a lot of the students are rich-kids and they have highly modified Cefiros since Skylines are very hard to find over here.... for me to have a car like this is instant street-cred with the students :)

post-29700-1155347579.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
×
×
  • Create New...