Jump to content
SAU Community

Recommended Posts

Hi terry call captain thread on 0407077414 he will remove it for you. Tell him FOOLBOOST says hi :P

Excellent, thanks mate. Do you know how much $$$ roughly?

Do you know if this causes any boost issues?

if you're lucky, that exhaust port will still seal and there will be no change.

otherwise yes, of course.. you will get an exhaust leak which means there is less gas available to drive the turbo and your car won't boost as quickly.

The stud breaks because the leak was already there or because of an oil leak over the stud in question. So to answer your question - yes it will cause boost issues.....it will also effect air/fuel ratio readings. If one stud is broken you will be looking at around 4 -5 hours but the thread guy will not remove the turbo and manifold for you...you'll have to do it yourself or get someone else to do it.

just done mine lol worksshops charge 50 or more per stud to fix plus gaskets lol and so on..

i done myself they suck,,need small air drill if have some snapped of...

replace all of them if doing not worth doin 1 or 2

goodluck

captain thread is the MAN!!! he has gotten mine out twice, when i broke an easy out stud extractor off in the broken stud aswell...

cost a bit over a hundred $$ EACH. but i was so frustrated i had no other avenue. He has a mobile service which is very handy

VOTE 1 CAPTAIN THREAD

ive had this same problem, and now i got an oil leak from the head behind the stud.. i called a thread proffesional to fix it, and its still leaking, is there anything i can use to seal this leak properly? rather then replacing the whole head?

i've heard of exhuast studs breaking on many skylines. it was probably a techline in japan

they break because the inline-6 manifold is long, and has a turbo hanging off it. the weight and flexing from repeated heat cycling gradually fatigues the studs.

I had at least 3 snapped studs when I pulled the manifold off my R31 (was upgrading the turbo and figured I should do the studs while it was apart). I didn't suffer from any exhaust leaks either.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...