Jump to content
SAU Community

Recommended Posts

For sale: RX7 Series 6 AUSTRALIAN DELIVERED - Black 1992

Item Condition: Excellent

Price and price conditions: $42,000 ono.- willing to negotiate

Extra Info:

Its time for me to upgrade and get that White Series 8 I've always wanted! Yes I probably could have sprayed the car, given it a series 8 update etc but figured it probably won't cost me too much more to just buy one, and besides I didn't want to disguise what this car really is - a PROUD aussie black s6!

So its time to say good-bye and just hope and pray that she goes to a good family that will look after her well :D

Details:

Australian Delivered Series 6 1992, Black (In most cases easier to insure and pass emissions being Australian Stock)

Engine:

Mazsport (Bill Nabham) rebuilt motor, only 6000km since rebuild. Dyno tuned by world renown, Hitman. Mild port on primary ports, Extend port on secondary ports. Brand new factory housings, plates and aftermarket 2mm seals. $7k spent on engine rebuild alone, not including removal and installation! Total bill came to over $10k after all seals, pipes and hoses were replaced new. Very powerful and strong engine making 227kw at the rear wheels on factory turbo and fuel system! (dyno graph available upon request). In its current configuration it's perfect as a daily driver and for occasional track use.

Features/Mods:

QuikTrak tracking system (for peace of mind and cheaper insurance premiums!)

Factory sunroof

Factory leather seats

Factory Cruise Control

Factory Bose 'Wave Accoustic' system

Factory leather airbag steering wheel

3" Turbo back exhaust system (incl. HPC coated dump pipe)

RX7-SP intercooler and air-scoop

HKS bov

Apexi Power FC with Hand Controller (dyno tuned by Hitman)

Custom 18" ROH "Modena" polished rims. (Front 18x8; Rear 18x9.5)

Brand new (being fitted this weekend to pass pink slip) Falken FK452 tyres - 235/40/18 front; 265/35/18 rear..worth over $1200)

Spare set of factory 16" S6 rims

King Springs lowering springs

Nolathane diff mount

Slotted front and rear RDA brake discs (dot 5 brake race fluid)

SBS Carbon Ceramic front brake pads

Red painted Brake Calipers

Always garaged, oil changed every 5,000km, sparks every 10,000km.

12 months rego starting August 2006.

Every receipt kept for all work done to the car including regular services.

* I still have most factory parts (springs, Intercooler, downpipe, airbox and filter, engine bay covers, rims, CD/Cassette player, ECU)..pretty much everything bar original exhaust system.

I am not in any hurry to sell so please, only serious offers. I'm willing to negotiate on price and/or parts or trade (with cash) for White Series 8 RZ or Spirit R.

This is one of only a few genuine BLACK Australian Delivered FD's left (with sunroof and leather). VERY rare and very sought after!

Pictures:

adamrx71ty6.th.jpg

dsc02030lc6.th.jpg

dsc01987gv9.th.jpg

picture00389hk3.th.jpg

picture00429mj9.th.jpg

Contact Details: [email protected] or call 0410 611 661

Location: Sydney

Delivery & Conditions of Delivery:pickup only, no COD

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...