Jump to content
SAU Community

Recommended Posts

I have the following two diff packages for sale:

First diff set $600

R200 2 way GTR rear LSD diff. 4.11:1 ratio

2 x GTR axles (beefier then other nissan axles)

2 x GTR rear hubs (splines match the big GTR axles)

This set has been taken from a crashed R32 GTR and i have not driven on it personally. It was working fine before the crash, the diff is still within manufacturers specs for preload torque and the inside of the diff is shown below.

The hubs and axles are offered as is. This diff will fit almost any 90s rwd nissan if you swap on your existing rear cover and input flange.

p5030327xa6.jpg

Second diff set $700

R200 2 way GTR rear LSD diff. 4:11 ratio, the rear cover and input flange have been swapped to S13 items (may be bolt in for S14/15, R32/33 etc as well) and this diff will bolt straight into a S13 rear cradle with or without hicas.

2 x GTR axles (beefier then other nissan axles)

2 x GTR rear hubs (splines match the big GTR axles)

I have used this set with no problems, the diff is still within manufacturers specs for preload torque and the inside of the diff is shown below.

dscf0122kx0.jpg

dscf0123yl4.jpg

I much prefer pickup but if you organise freight then thats ok to.

I can also bring the diffs to sydney when i attend drift days but i'd rather them gone ASAP.

I am willing to swap for 5 hole driveshafts plus cash or a T28/GTiR turbo or similar.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Got my R34 gearbox around 4-5 weeks ago. Came into some extra $$ recently and after I cleaned the mess off the notes, I thought, might as well buy that R34 box I've been pondering.  In that time I've pulled the engine out, replaced rod and mains bearings, done a few other engine things that are much easier with the engina out eg PRP oil pump upgrade, replacing wastegate coolant lines, installing Turbosmartass turbo oil pressure reg, made some mounting brackets for some of my mods that are "hard to reach", converted the R34 box to R33, put the engine and new gearbox back in the car. Plus cleaning ...Oh my god so much cleaning when doing such a project. Yep I'm a busy bee, buzz buzz. As part of the gearbox project, researched posts and found this thread (In which i nailed it for the OP), hence the post here # logical thinking.. Not all about you old boy, SOrrryyy. Dare I ask,  how's yours going ,> Or you got it done yet, and if so why didn't you post any of the tips I posted to help other members? ???      
    • Seems to be the case mate , still an OK price for a grey import.
    • I’m interested in the carbon diffuser fins and Toshiba MFD screen replacement if they’re still available.
    • @GTSBoy yeah i know it was not the "great" idea but it is and option...but i think i will stay on no BoV rather then trying to make it work with "half" this and that. But that GReddy FV2 is cool...i like that you can make it like stock if you want (and have/make the custom pipes) For other thanks! it was alot of information. But for the sound...a dont rly "like" both of them...specialy if they are loud...but if i "must" choose i would rather have little whooosh rather than sutututu with no BoV....BUT that is what is i gonna get. So for the all info i gather. In my case:  No BoV is not that bad cuz it is stock...and iam used to put N/clutch right after rpms are around 1000 so it should be ok...just need to avoid "big" drops. But i do not have the engine in the car so i do not really know how "bad" or good it is. But as i had that little test drive it looked ok. The atmo BoV should be worse car would dump to much fuel specialy between the shifts...so without proper tune/ECU i dont want that. BUT with that...car should drive ok with no problems right? (i do like there is less piping wih this solution) 🙂 
    • Usually an RB20 won't stay in closed loop idle anyway. The O2 sensor gets too cold, stops swinging.
×
×
  • Create New...