Jump to content
SAU Community

Recommended Posts

  • Replies 278
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Yeah it was mentioned at the last Berri Car Show - tho even if it goes ahead you do realize its a 3-4 hour drive from Adelaide ;\

And a 3-4 hour drive to any decent hospital for the more serious drag entrants attending :)

on the bright side you could visit the big orange while ya there

Edited by Inline 6

Jess your kidding right

no one in there right mind will take there car up there what if you break something

not to mention its a 1/4 the drive to melboure take half a tank of juice to get there just to watch some drags screw that for a joke them if drags finish at 11 you still have a 2-3hr drive home not cool when your already tired

Well could go camping or something there make a weekend of it, but deff not as a regular thing people would go to.

could you imagine the drive home though, 50 odd drag cars cruising along hmmmz

well theyd prob have enough of it and be tired

Edited by Inline 6

Hey Jess when i was working in one of the pub i used to work in i was speaking to a family about this (would be at least 3 years ago). there is already an 1/8th mile track up there and they are trying to get it extended to a full 1/4 miletrack. The father of the family was part of the drag racing commitee up there and he said that it was going to cost around the $750,000 to get it extended.

I also have heard some VERY good information about the proposed motorsport park from the brother of one of the members of the consortium, there will be an anouncement in the not to distant furture, AND WE ARE GOING TO LIKE IT.

riverland is a joke

elaborate a lil for us :(

i heard from my sisters cousins mother that lives out there (who all happen to be the same person) that it was going to be a tractor/ride on mower draggin facility.

just messing :P 1/8 mile, how much would 4wd's spank competition there

I was just passing on info :(

It is nice to have choice and maybe SA is finally stepping in the right direction...Like his interstate brothers

See what happens..

I have traveled 8 hrs to do an event from Sydney to Shepparton just for the thrill and fun of it for a weekend away...Loved every minute of it

I have also emailed AMC again as I am trying to get information on a tentative date for AIR opening..

AND WE ARE GOING TO LIKE IT.

c'mon Dale, you tell us, make the neccesary phone calls!

i heard from my sisters cousins mother that lives out there (who all happen to be the same person) that it was going to be a tractor/ride on mower draggin facility.

lol Dan, does she play a banjo and howl at the moon too

Just because we love all new information, and no I don't have the pictures mentioned in this passage or writing lol...

Stolen from calaisturbo.com.au which stole it from some other forum I don't know.

the new billboard has been installed due to the new bridge that is being constructed as part of the northern expressway project. that road will become a dead end and the houses that are there have been purchased to be demolished, aswell as a large portion of land around the scrutineering area inside the track. the new entrance will actually be from the opposite side of the raceway with larger improved parking facilities??

i have walked the entire circuit today and snapped some pics on the phone camera. with the approval of the track manager of course who was extremely friendly and quite informative to me. we spent a good 20 mins chatting about when the likely date will be to re-open (yes the million dollar question!!) i can tell you there is a fresh 1340 feet of asphalt which looks a treat! relatively flat with no major cracks through it as was posted a few months back. however that is all that has been done! there is a step up of around 2" from the burnout pad onto the track itself and the same at the deep end. the area from the finish line on has sections missing and the return track has been completely dug up (rubble down waiting for asphalt).

it is anticipated that within the next 2-3 months work will re-commence inside the track once the expressway work is done and racing WILL return shortly after. they are sick to death of doing nothing out there and yes they all read the internet forums and know what's being said about them so action is underway.

Thanks.

Just because we love all new information, and no I don't have the pictures mentioned in this passage or writing lol...

Stolen from calaisturbo.com.au which stole it from some other forum I don't know.

the new billboard has been installed due to the new bridge that is being constructed as part of the northern expressway project. that road will become a dead end and the houses that are there have been purchased to be demolished, aswell as a large portion of land around the scrutineering area inside the track. the new entrance will actually be from the opposite side of the raceway with larger improved parking facilities??

i have walked the entire circuit today and snapped some pics on the phone camera. with the approval of the track manager of course who was extremely friendly and quite informative to me. we spent a good 20 mins chatting about when the likely date will be to re-open (yes the million dollar question!!) i can tell you there is a fresh 1340 feet of asphalt which looks a treat! relatively flat with no major cracks through it as was posted a few months back. however that is all that has been done! there is a step up of around 2" from the burnout pad onto the track itself and the same at the deep end. the area from the finish line on has sections missing and the return track has been completely dug up (rubble down waiting for asphalt).

it is anticipated that within the next 2-3 months work will re-commence inside the track once the expressway work is done and racing WILL return shortly after. they are sick to death of doing nothing out there and yes they all read the internet forums and know what's being said about them so action is underway.

Thanks.

Pictures like these by chance. Taken about a month ago by a good mate.

post-53780-1240415806_thumb.jpg

post-53780-1240415818_thumb.jpg

post-53780-1240415831_thumb.jpg

post-53780-1240415846_thumb.jpg

post-53780-1240415856_thumb.jpg

post-53780-1240415866_thumb.jpg

All this talk makes me angry, if I dont think about it then I don't get mad... Easier to just let that fat cvnt do what hes going to do and see how it goes, no point speculating.

Yeah Blob Jane will just sit on it till he drops off the perch, then it'll get sold off and turned into housing or something.

Obviously he doesn't see it as being very profitable hence the taking the time getting it ready. I would be a bit hesitant to dump s loads of money into it as well. I'm under the impression it wasn't a gold mine previously, if it was it would be finished by now. who would be saying no take ya time fixing that guys i dont want to make money. There weren't that many people there the few times I went maybe enough to make a small profit but nothing spectacular.

do you single handed hold bob lame responsible for a whole buisness shutting the doors, id say attendance was an issue along with other factors.

but i dont attend there board meetings so i wouldnt know

Edited by Inline 6

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...