Jump to content
SAU Community

Recommended Posts

Hey Guys,

I have just sent my car to the mechanic and he will be looking at it 2moro but i would be interested to see what you thought of the issue i am currently having.

Basically the car runs fine day to day and the only issue i have is that when the car is pushed it starts to rev fine, but then around the 3500 - 4000rpm mark its struggles to rev and feels unwilling to rev (almost like petrol is not gettin through properlly) and then towards 5500 - 6000 it seems ok again. But my friend and i drove it the other nite and he could tell straight away (also a 32 owner) and im starting to worry.

It has been this way for a while but because i dont rev beyond 3500 too often i didnt pay much attention..

So yeah, any ffedback appreciated

Link to comment
https://www.sau.com.au/forums/topic/131546-engine-issue/
Share on other sites

Oh ok, i was thinking it would not be a major problem as in general the car is fine and the problem is only under hard driving in that specific rev range as i said. My main concern that it was not major as in like a few cylinder loosing compression and a possible critical problem in the block. But i guess i just wanted assurance...

cause wen i want to drive faster now i generally drive to 3500 which its fine to and then change, but in first gear off the lights its more likely to rev clean right through to 6500rpm and the problem happens more in 2nd, 3rd, 4th

Link to comment
https://www.sau.com.au/forums/topic/131546-engine-issue/#findComment-2435222
Share on other sites

Oh ok, i was thinking it would not be a major problem as in general the car is fine and the problem is only under hard driving in that specific rev range as i said. My main concern that it was not major as in like a few cylinder loosing compression and a possible critical problem in the block. But i guess i just wanted assurance...

cause wen i want to drive faster now i generally drive to 3500 which its fine to and then change, but in first gear off the lights its more likely to rev clean right through to 6500rpm and the problem happens more in 2nd, 3rd, 4th

I had the same problem with my r32 gtst. To fix it I made put the timing forward, the tiniest bit. and the problem was gone.

I checked all my coils and plugs and they were fine so this was a last resort.

It worked. *shrug* dont ask me why.

hope this helps

Link to comment
https://www.sau.com.au/forums/topic/131546-engine-issue/#findComment-2435242
Share on other sites

I think there ia a tutorial, mabey sticky about the coilpacks cracking due to heat, check it out :ninja:

Here tis'

http://www.skylinesaustralia.com/forums/in...showtopic=32356

Hrrmm after reading this im not sure this would be my issue, ad the car only has a 3" cat back and pod filter...otherwise stock and has been all its life, i bought it in original nick with not a thing touched, and its never been boosted which seems to cause the problem with the coil packs due to the increased temp

Link to comment
https://www.sau.com.au/forums/topic/131546-engine-issue/#findComment-2435257
Share on other sites

I had the same problem with my r32 gtst. To fix it I made put the timing forward, the tiniest bit. and the problem was gone.

I checked all my coils and plugs and they were fine so this was a last resort.

It worked. *shrug* dont ask me why.

hope this helps

Actually its interesting you say that, because my mate when i got the car helped me do first service and was suprised at the position of the timing as he used to hav a 32 and knew a bit bout them and did a lot of work on his car. Ill mention it to mechanic..

Link to comment
https://www.sau.com.au/forums/topic/131546-engine-issue/#findComment-2435264
Share on other sites

Also I have noticed when the car is just started (cold) and then driving it is more noticeable, it just seems really unwilling to rev, its like ur asking to much and the fuel is just sputtering in as u build up some revs so i dont push it, but i know when i tested it (a year ago when buying) we cold started and it was more than happy to rev hard and it pulled hard and quick, i dont know what spark plugs the mechanic put in it last time also he didnt use synthetic oil (which he will this time after i asked him to) but i doubt thats related

Link to comment
https://www.sau.com.au/forums/topic/131546-engine-issue/#findComment-2435282
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • With the system, once you drive it for a bit, and before you turn the car off, does the car fix its date and time? When you say the date is wrong, what date does the vehicle think it is, and does it always show the same date? My thoughts from a process driven view is; The system may be defaulting to a standard start date/time. The main reason you'd typically see this occuring, is the system is losing its constant/backup power supply.   If its always defaulting to the same date/time at start up, and especially if it fixes itself while driving, I'd say either the non volatile memory has an issue, or the power supply to the volatile memory that stores this information.   The other thing I'd check is if there is anywhere in the system you can adjust the date and time from. If the date/time is still moving forward since it wished you happy new year, then it is 100% possible the system has just had a bit of data corruption occur, and you likely need to find a way to reset the date/time in the vehicle.
    • Scissor Jacks are an accident waiting to happen, the only time they should be used are in an roadside flat, even then a tyre and rim should be placed underneath 
    • You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
×
×
  • Create New...