Jump to content
SAU Community

Recommended Posts

I was thinking about posting the exact same question.

My fuel economy is up shit creek. I'm getting 15L/100 OFF BOOST and then 20+L/100 when giving it a bit of stick.

I've recently had a new fuel pump and new timing belt.

What stuff should I check?

Whats there to check with the 02 Sensor?

Link to comment
https://www.sau.com.au/forums/topic/13399-fuel-economy/#findComment-259054
Share on other sites

I was getting really bad Fuel Economy a few months ago (lucky to get 200k to a tank) I replaced my o2 sensor 4 a ford unit all is now good.

Long steady drives i get over 500 k to a tank, arround town strapping it i get at worst 400k's.

I would get you O2 sensor replaced.

The ford unit is the same as the nissan one only cheaper and you need to change the plug to the nissan one 4 it to fit. For under $90 well worth it.

Regards

Damqik

Link to comment
https://www.sau.com.au/forums/topic/13399-fuel-economy/#findComment-259291
Share on other sites

The o2 sensor is located on the back of the turbo & has 3 wires going to it. I got my replacement one from Barnes high performance Nambor (he can fit 4 u tho I did mine myself)

The Afm is mounted on the back of the air box has about 5 wires going to it, give it a spray with Co Contact cleaner made by CRC

try the following link for more info

http://www.wave.co.nz/~hksnz/techfiles/oxy...orlifespan.html

Link to comment
https://www.sau.com.au/forums/topic/13399-fuel-economy/#findComment-259294
Share on other sites

The O2 sensor is only used by the ECU during closed loop operation. Even with a faulty O2 sensor your fuel economy should only drop a bit.

300km to a tank is a significant drop. I doubt it'll be your O2 sensor. Could be a bad tune, fault spark plugs, a blocked/damaged cat.

Link to comment
https://www.sau.com.au/forums/topic/13399-fuel-economy/#findComment-259302
Share on other sites

Yeah, I'm talking 300km at BEST.

If I give it a bit I'm lucky to get 250.

I spoke to a mechanic about it today.

He's gonna replace it for me under the warranty I got with my car.

Who says those warranties aren't worth shit hey?

We'll see how it goes hey?

Link to comment
https://www.sau.com.au/forums/topic/13399-fuel-economy/#findComment-259877
Share on other sites

  • 3 weeks later...
Originally posted by poyz

The O2 sensor is only used by the ECU during closed loop operation. Even with a faulty O2 sensor your fuel economy should only drop a bit.

300km to a tank is a significant drop. I doubt it'll be your O2 sensor. Could be a bad tune, fault spark plugs, a blocked/damaged cat.

I disagree. I changed my O2 sensor, and that has made all the difference. I'm getting waaaaaaay better economy then what i did before.

Link to comment
https://www.sau.com.au/forums/topic/13399-fuel-economy/#findComment-292896
Share on other sites

Originally posted by poyz

The O2 sensor is only used by the ECU during closed loop operation. Even with a faulty O2 sensor your fuel economy should only drop a bit.

300km to a tank is a significant drop. I doubt it'll be your O2 sensor. Could be a bad tune, fault spark plugs, a blocked/damaged cat.

Actually skylines spend most of their time in closed loop the only time there not is @ full throttle or accelerating off.

If the O2 sensor is stuffed the ecu gos into the safe (Rich) limp home mode.

Therefore as many people have said replacing the O2 sensor has given them much better fuel economy if you have a stock or near stock car and get shit economy I'd recommend replacing it.

Link to comment
https://www.sau.com.au/forums/topic/13399-fuel-economy/#findComment-293313
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...