Jump to content
SAU Community

Recommended Posts

It's not a Nismo wing. It's an Altia wing and it's ugly as sin.

The unfortunate part is that when you remove it you will be left with I think 3 or 4 big holes in your rear guards. Very bad.

I have seen it with the sides removed but the boot part left and it looks ok. There are another 4 holes in the boot holding it on.

Link to comment
https://www.sau.com.au/forums/topic/134082-my-own-chop/#findComment-2507791
Share on other sites

post-29391-1158093337.jpg how it looks as we speak

post-29391-1158093355.jpg what i want to happen

what do u think?

i reckon it still might need just the boot spoiler?????

i definately agree that it needs the spoiler but not that huge one! maybe the standard gtt spoiler or better yet a gtr replica!

Link to comment
https://www.sau.com.au/forums/topic/134082-my-own-chop/#findComment-2514272
Share on other sites

Heya,

I had the altia wing on my 34.. see before

post-950-1158760264.jpg

and after

post-950-1158760272.jpg

You'll end up with bullet holes on each side when you remove it, and probably some bent panels, so basically the two rear guards and boot will have to be resprayed. Possibly your rear lights too to match the freshly sprayed boo.

Link to comment
https://www.sau.com.au/forums/topic/134082-my-own-chop/#findComment-2514334
Share on other sites

It cost me $900 all up (fill the holes, straighten the panels, blend the guards, respray the boot and tail lights). The removal is easy, i did that at home, there's about 7 screws per side, and 4-6 screws for the spoiler on the boot.

Link to comment
https://www.sau.com.au/forums/topic/134082-my-own-chop/#findComment-2514400
Share on other sites

Were you happy that u got rid of it.

i feel a little worried, i think it actually suits my car. when buying a 34 i refused to get one a that spoiler but once i seen my car low and with 19s it changed my opinion.

post-29391-1158762994.jpg

from the front its ok but the back it looks big.

post-29391-1158762915.jpg

Link to comment
https://www.sau.com.au/forums/topic/134082-my-own-chop/#findComment-2514421
Share on other sites

Hey Steve, yep i'm pretty happy with the result. The car looks alot cleaner without that big arse spoiler. Although, it does seem a little more bare without any spoiler whatsoever. What would be nice eventually, is to put a stock R34 GTR spoiler on (not the stock GTT), the GTR spoiler has a bit of meat and height on it without going overboard.

Link to comment
https://www.sau.com.au/forums/topic/134082-my-own-chop/#findComment-2514638
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Based off what you’ve said here, I think I’ve figured out a good bit of what I’ve done wrong -  So on the line going from the PCV valve to carbon canister, there’s a T joint that is pretty much right next to that lower port - I hadn’t noticed that the hose in the diagram was curved to attach onto the carb, so I was putting that line for the lower port onto the PCV line / carbon canister line instead. I’m going to have a flick through the manual again tomorrow and should hopefully find a diagram that’ll show me where that T joint should be connected to. Timing also 100% needs to be sorted out as well, should be able to tackle that tomorrow as well. Definitely feel like I should be on the right track now though. 
    • The screw is for idle (pilot circuit) mixture adjustment. Else, I'm confused ~ the diagram shows 2 carby ports, and the intake manifold port, but you're suggesting the "2nd port on the back of the carb that isn’t mentioned in the diagrams" ...yet, both carby ports are shown...que?... ...in any event, that port should be connected, but if not (like it is now), it's unlikely to cause a backfire out the carby (it would introduce false air and give you a fast/lean idle) ...sounds more like timing issues/spark plug wire routing responsible for the backfiring.    
    • That's fair, I can see both points. I get enthusiastic when I see the FS section has a new post and want to see what interesting thing someone is selling. Then I get deflated it's a bump of a 10 year old post. Ha ha
    • Couple of litres of moonshine from his southern cousins would do it...
×
×
  • Create New...