Blitz SSBC Boost Controller Setup

[adam 32]

one is manifold, one is wastegate, one vents the pressure away

but which is which?!?!

[poyz]

I shouldn't say this, but at an educated guess.

Gold thing goes to wastegate, the other two can be used as either manifold or opened.

Now that I think about it, that picture you uploaded earlier looks shockingly similar to a std soleniod. (Well on the i-R, anyway)

[slayer]

The solenoid is the same as the DSBC Spec S ( the single solenoid version) - surely the guys at Cypher or another performance will know what to hook to what? Ive asked Jordan if he can shed any light on the situation.

Sorry something that should be straight forward is becoming a drama... we will sort it soon

ta

Conrad

[slayer]

Poyz it IS the same as the DSBC Spec S solenoid if you have worked with one of them...

do you have the doco on setting one up (or know what hooks to what?)

The DSBC Spec R has that huge dual solenoid box with the in and out connectors labelled clearly.

Ta

Conrad

[poyz]

Sorry guys, if I had doco I would have gladly shared it!

[adam 32]

nah i dont believe in performance workshops

i can do this myself

[slayer]

Well ring Blitz australia and they can email you the DSBC Spec S manual

[adam 32]

nope no good, they say that its too old and they dont have any documentation left...

[slayer]

Adam, they MUST have documentation for the DSBC Spec S - its a current model... dont ask for doco on the SSBC, you only need to know how to hook up the solenoid and the DSBC Spec S uses an identical solenoid.

Hmm... what a pain in the a**

[adam 32]

yeh i said its the same solenoid, but they go nah we dont have anything, sorry

i know the guys at cypher fairly well so will head down after work and try n get some advice from them

[slayer]

Good luck dude, let me know if you need any help..

I will keep looking for info for ya, spent a few hours digging around today with no luck... I will download the Japanese PDF language set at work tomorrow and dig through the Japanese site for info.

Ta

Conrad

[slayer]

Downloaded the Japanese manual for the Spec S (got any Japanese mates?) and the piccy for solenoid installation shows the IN line being the bottom steel connection, and the OUT line being the bottom of two plastic connections closest to the body of the solenoid.

I am unsure what the top plastic connection does, but its not shown as either connected or blocked off.

Hope this helps - oh, and make sure you mount the solenoid within 1m of the wastegate (usually where the stock solenoid was is a good mounting point) to keep good response.

Ta

Conrad

[Sydneykid]

Hi adam 32, why don't you just take a guess and connect it up. It isn't gunna harm anything, leave the hoses long enough for swapping and take it for a short drive. Watch the boost guage and swap it around until it works. Take less time than typing posts.