Jump to content
SAU Community

Recommended Posts

In order to find out if vehicle occupants are wearing seatbelts, or to breath test a driver, there has to be a Police officer available to stop and check each vehicle.

(Unless the vehicle is fitted with an interlock)

A vehicle doesn't need to be stopped to check the speed at which it is travelling.

This sounds speed related? At a lower speed, he may possibly have been able to control the car and not kill himself and someone else.

Yeeeeeeeah cause we have open speed limits in our suburbs :P It was an 80kms limit in a suburban area, not the open highway.

There are NO speed related death in the open speed limit areas that I am aware of. As I said earlier, the only road deaths are from inner city road limited areas. I am not saying open speed limit everything, cause that's stupid. I am saying if something (open limits) aren't broken, don't try to fix them.

Yeeeeeeeah cause we have open speed limits in our suburbs :laugh: It was an 80kms limit in a suburban area, not the open highway.

There are NO speed related death in the open speed limit areas that I am aware of. As I said earlier, the only road deaths are from inner city road limited areas. I am not saying open speed limit everything, cause that's stupid. I am saying if something (open limits) aren't broken, don't try to fix them.

I read last year that the number of fatal accidents in the open speed area of NT where crash investigators consider speed to be a "contributing factor" is considerably less than in other states. So, yes, there are fatal speed related crashed in NTs open limit areas, but fewer than in the rest of Aus.

But, alas, they also said there are a lot of intoxicated drivers in rural areas in poorly maintained cars dying on NT's roads to make up for the lack of speed related deaths. :no:

*sigh*.

The message behind that statement is... the faster you go, the faster things can get out of control.

You have less time/distance to react to an emergency.

The faster you're going, the harder you hit.

How hard you hit is a major factor when it comes to the difference between being able to walk away from the accident unharmed/with a few scratches & whiplash, or buying yourself a one way ticket to a box under a lawn somewhere.

(Or somewhere in between, where you get to have a set of wheels attached to your body for the rest of your life)

This sounds speed related?

At a lower speed, he may possibly have been able to control the car and not kill himself and someone else.

Isn't that 10 too many?

The point I was trying to make was that police crash investigators are very quick to tick the box on their reports that say it was a speed related crash. I read that something like 2/3rds of "speed related deaths" on our roads have other contributing factors, such as alcohol, drugs, unlicenced drivers, poorly maintained vehicles, passengers riding in the boot/tray, people not wearing seatbelts, running red lights, disobeying other road rules, dangerous driving (i.e. drifting etc, not necessarily speeding)... You get the idea.

Not blaming the police crash investigators for ticking the box - they're just doing their jobs. But politicians will spin the statistics to conveniently leave out other contributing factors to focus on the speed element in an attempt to justify their Big Brother watch over speeding motorists...

I had a bit of a piss up last night and one of my good mates (who is a cop and races BTH - http://www.beattheheatnt.org.au/gallery/vi...s&id=Smokin ) told me that what he has been shown is only 18% of road deaths in the NT are caused by speed. Other fatalities involve speed, but usually involed drunk / drug driving, unknown road conditions, not wearing seat belts, fatigue etc etc and he thinks 18% is pushing it too...

There would have been deaths on the open roads, its just not a common occurance, so I don't remember any. I know 2 japs died when they brought their ferrari over for the Cannonball run, which is why it was cancelled. Tourists who aren't used to open flat roads have trouble avoiding the temptation of putting their foot down are the biggest problem. An open speed limit isn't an invitation to see how fast your car goes, it just means you can travel at a speed YOU feel is safe, and why take that away?

So what was the outcome of the vote? Was it just a politician only decision or was the road going public actually involved in the decision? Don't you just love the way our 'democracy' works.

death tolls havent changed on our roads in 10years. these new laws around the country are doign absolutly f**k all.. you cant stop dumb people doing dumb things, thats why deaths/accidents occur regardless of speed limits in place and cameras

Edited by MMM
i find it fairly interesting that states (and countries) that have areas with open speed limits often have the lowest road death rates.

could be the fact that people no longer feel the need to open the taps on any old (and normally fairly shocking) road when they do it without reprecussions elsewhere.

when traveling on open road most people only travel at around 140 so your consentration levels are very high

when i travel in southern states at 100 i dont concentrate, have had more near miss down south

In the territory it about 300 kms between town centres so it will be hard 2 police

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...