Adaptor For Z32 Afm To Apexi Pod Filter

[Drivebai]

HEy all i recently acquired a z32 AFM 2nd hand from someone off these forums..

However both ends of the Z32afm is round, so ther is no plate to bolt the afm to my apexi pod filter?

does anyone know how to bolt this on or if i can get an adaptor for it and where from?

Thanks heaps.

[paulr33]

its the same as the normal GTST airflow meter both are 70mm OD so it should suit either. its just the z32 has a higher calibrated voltage scale

[Drivebai]

Thanks paul,

Its just my original AFM had one round end and one end was flat so i can bolt it straight onto my apexi pod filer.. Now the Z32 AFM i have purchased has 2 round ends so i was wondering how can i now bolt my pod filter to it, as ther is no plate or holes to bolt it onto. Do you know what i mean?

[paulr33]

the z32 shoudl be identical to the normal gtst afm

are u sure u have a z32? post up a pic

one end should be round, the other should have an oval flat pattern with 4 bolts holes

[Drivebai]

Hmm i'm thinking maybe this dude sold me the wrong one..

He told me it would suit an R33 GTST.

here is a link to the pic

http://www.skylinesaustralia.com/forums/in...sg&id=56721

Also does it make a diference if the mesh is removed?

Thanks again mate

Edited October 8, 2006 by Drivebai

[paulr33]

link is broken

post it up in here

[Drivebai]

here it is..

I only bought one of them.. it was off an R32 GTR

Edited October 8, 2006 by Drivebai

[Drivebai]

actually, i've looked at it closely it looks like the guy has cut the plate thingy off and removed the mesh perhaps maybe to suit his GTR.. eitherway i'm stuck now on how to mount it to my pod filter