Jump to content
SAU Community

Recommended Posts

and it doesnt do it while im down gearing :S i hope its not a syncro? and also when im changine quike if i change slow it doesnt crunch.... arghhhhhhhhhhhhhhhhhhhhh

Edited by Jsikalias
i change 3rd to 4th gearr fast the gears crunch

Does it happent when you change up at a reasonable pace? it could be the synchros (but it shouldn' be)... depends on what you call 'fast'

but before pointing at the synchros, first get your cluth seen to...

it its slipping... its probably worn. and when you get your clutch replaced, it will (should) include the pressure plate.

Although I don't understand 'only slipping in 3rd'... but if the clutch is consistently slipping, fix it.

I think 2nd and 3rd have double synchros, 4th and 5th dont, but the 4-5 change is a smaller ratio. It could be the clutch isn't completley disengaging - but even with the clutch disengaged, the synchros still need time to spin everything up to speed.

After all that armchair diagnosis, I warn you that I am mereley an computer geek with just enough knowledge to be dangerous.

just take it easy on the 3-4 (and 4-5 I'd guess, if you could get it fast enough) changes, and get your clutch seen to when you can. the clutch _may_ be causing the secondary issues (not completley engaging / disengaging).

there should be no need to go from 3-4 fast - I can pull onto the freeway in 2nd (100), and 3rd goes to 150. Take it easy with your car - and what exactly is it? GT-T or GTR?

its a gtt and it only happens when i punch the accelerater and change gears reasnobly fast at around 3-4rpm and also it slips in 2nd sumtime or 3rd but when im in 3rd and im just creeping to 80 in 3rd it doesnt do it but it kind of clicks into 4th gear.? oooohhhh and also wat i mean by fast is when im at a highspeed like above 80 i have to hold the cluthch in for abit longer so it doesnt crunch?

Edited by Jsikalias

any other suggestions?? i also noticed tonight that all my other gears are abit harder to slip into gears i have a feeling it might be the clutch but the only thing that amazes me is why does it crunch in 4th

Edited by Jsikalias

clutch or synchros - you want more than that, take it to a mechanic.

and if the clutch _is_ having issues - fix that first. Then come back if there are still issues.

test the clutch. pull onto the freeway in 2nd, give it heaps. make sure you DON'T lose traction... if your clutch will slip, you should feel it.

thats about all I can help with - find a mate who knows cars and take them for a spin, or just go to the mechanic...

There could be many reasons for the crunch, as long as the clutch is suspect, there is no point speculating.

--> bye

i got the problem checked out at dandy gearbox n clutch specialist today they found out that my 4th gear synchro is on its way out and the clutch still has abit of bite in it which they say, just letting everyone know that i got quoted $1800 including an excedy clutch, and a 4th gear rebuilt farking expensive shit..... the clutch alone costs $1100 :( and the 4th gear rebuilt including stripping the box apart and putting new oil in $700 and they give me a warranty on the 4th gear but not the clutch.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
    • Yeah the rule of thumb with an LS is 7psi per 1000rpm. That is decidedly not enough at 6800rpm. I mainly looked for the scenarios where knock started to be picked up and it was later in the session when things were hotter, and oil was thinner, and the pressure was lower than it should be. (i.e very horrible). I am hoping with thicker oil (I was running Penrite ten tenths 10-40, the manual specifies 10-30) that does not leak that it's much improved at that time!!! I am using Project Mu Club Racer CR pads. I'm also using the Project Mu 335C fluid. The symptoms imply that it was fluid that boiled, but no bubbles seemed pretty weird to me when I bled it today. I want to try Castrol SRF as it has a much higher wet temp but, well, I have new Project Mu fluid lol... so I should at least use that. The pedal on track was really noticable. It went from basically normal feeling to instantly near-floor. The car did pull up as before, it was just very much nearly at the floor before the brakes engaged. At that point I pretty much decided the day was very done, it did *kinda* come back during that very slow cooldown lap into the pits. Felt perfectly fine driving home.
    • f**king around with the bro
×
×
  • Create New...