Jump to content
SAU Community

dissapointed

japwpn

By japwpn,
in General Automotive Discussion

 Share

Recommended Posts

japwpn Collaborator

japwpn

Posted
Posted

i bought my r32 about 3 weeks ago and from day one i had this miss at about 5000 rpm so yesterday i serviced it put new plugs oil , oil filter and threw in a dual stage for good measure (hehe)and i then threw the car on a dyno after a few runs i got 155 hp @ the wheels but it was starting to lean out and ping so we backed off the timing and lowered the boost and i ended up with 140 hp@the wheels my R31 had 110 hp@the wheels with zorst my question is why is my car is a barge take in to account that it has the following mods cat bak zorst hks filter sard b.o.v 13psi of boost i would have thought the car would be good for atleast 160 hp @ the wheels :D

Link to comment
https://www.sau.com.au/forums/topic/13916-dissapointed/
Share on other sites
inark Grand Master

inark

Posted
Posted

get ur ECU remapped.... i got mine done... talk to Dr_Drift

im putting out about 142.5rwkw @ 4496rpm which is roughly 180rwhp with a peak boost of 13.66psi @ 4399RPM on a 31degree day.

mods are in my sig.

Link to comment
https://www.sau.com.au/forums/topic/13916-dissapointed/#findComment-282659
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      Absolutely could be. I collected data logs from when the O2 sensor was still out and also after I had replaced it so will try to compare them. Pretty confident that the affect is lowered with the new sensor, will check logs at the same RPMs/conditions. 
    • Bennym35
      New guy

      By Bennym35 · Posted

      Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • Songo
      New kid on the block

      By Songo · Posted

      thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
×
×
  • Create New...