Jump to content
SAU Community

1993 R33 Gts-t Skyline

Mr-Toy33

By Mr-Toy33,
in Classifieds

 Share

Recommended Posts

Mr-Toy33 Grand Master

Mr-Toy33

Posted
Posted

For sale... 1993 model, R33 GTS-T Skyline with standard RB25DE-T engine.

Have had it for just over a year.

The car has been a excellent project and still to this day will remain one of my most favourite cars.

The car is in A1 mechanical condition. Has been services every 5 to 10,000k's.

Will be sold with a RWC and QLD rego till Dec, 2006.

This car still has the orginal skyline floor mats.

FOLLOWING MODS -

Engine Mods -

Standard turbo rebuilt & high-flowed

Nismo 555cc injectors.

Front mount hybrid copy intercooler.

Splitfire coilpack.

Apexi AVC-R Electronic Boost Controller.

Apexi PowerFC + hand controller.

Apexi dual channel air pod filter.

Upgraded & modified 1200hp hyper-twin platted excedy clutch (New lighten flywheel also installed for this clutch).

Bosch 040 internal fuel pump.

Front & rear strut bars/braces.

Oil cooler & oil filter relocator.

Z32 Air Flow Metre.

Exterior Mods -

Nismo fuel cap.

Nismo oil cap.

Nismo 400R front bar.

Philip's crystal white headlight & parker bulbs.

Trust style rear-wing/spoiler.

17" White AVS RIMS.

Rear sprayed brake callipers black with Nissan work painted white.

APEXI 1.3BAR Boost radiator cap

Interior Mods -

Nismo Racing seat belt/shoulder pads.

Nismo leather gear knob.

Re-coloured/sprayed centre dash console area.

White dials (for speedo, rpm, fuel, boost, oil pressue and temp).

Autometre 2" boost guage.

Autometre 2" air & fuel guage.

Sound entertainment setup -

Alpine DVD & MP3 headdeck.

No-name 7" Screen with TV.

Front speakers: Alpine 6" with tweeters

Rear speakers: Pioneer 6" 3 way speakers

Alpine 500watt 4 channel AMP

1x 15" blankrupt sub-woofer.

The car is located here in Brisbane, QLD on the southside (approximately 5-10mins drive from the CBD).

ASKING PRICE - $20,000. ONO

The car has been tune to perfection by Matt Spry from P.I.T.S down at southport on the Gold Coast.

Currently have customised number plates (TOY 033) which can be sold with the car at an additional price based on the offer.

To contact me, please PM me for more details.

post-22617-1161214805.jpg post-22617-1161214832.jpg post-22617-1161214847.jpg post-22617-1161214860.jpg

Link to comment
https://www.sau.com.au/forums/topic/139326-1993-r33-gts-t-skyline/
Share on other sites
  • 1 month later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...