Jump to content
SAU Community

Installng Turbotech Boost Control

Noel

By Noel,
in Engines & Forced Induction

 Share

Recommended Posts

Noel Community Regular

Noel

Posted
Posted (edited)

Ok I have a bob stock R33 GTS-T (only mod being recently installed R34 SMIC)

I have a turbotech boost control & a boost gauge on its way to me in the mail & will be installing asap

Since car is basically stock i only want to run the std boost level (7psi) but all the time instead of the 5/7psi via the solanoid (which i will bypass completely)

Anyway i know there is a brass restrictor in the line from IC piping to t-peice

My question is should i leave this in or take it out? as turbotech is a kind of a restrictor itself

I have heard to get std boost using a turbotech you need to have screw wound right out & it is JUST hanging on so with restrictor out wouldn't it mean i would be able to screw Turbotech in a bit more thus being a bit more secure & stable & accurate?

Also re boost gauge...Is it simply a matter of putting a t-peice in the top vacuum line coming from that little black box on firewall on drivers side & bobs your uncle?

Cheers

Noel

Edited by Noel
Link to comment
https://www.sau.com.au/forums/topic/142366-installng-turbotech-boost-control/
Share on other sites
d00dz Grand Master

d00dz

Posted
Posted
Ok I have a bob stock R33 GTS-T (only mod being recently installed R34 SMIC)

I have a turbotech boost control & a boost gauge on its way to me in the mail & will be installing asap

Since car is basically stock i only want to run the std boost level (7psi) but all the time instead of the 5/7psi via the solanoid (which i will bypass completely)

Anyway i know there is a brass restrictor in the line from IC piping to t-peice

My question is should i leave this in or take it out? as turbotech is a kind of a restrictor itself

I have heard to get std boost using a turbotech you need to have screw wound right out & it is JUST hanging on so with restrictor out wouldn't it mean i would be able to screw Turbotech in a bit more thus being a bit more secure & stable & accurate?

Also re boost gauge...Is it simply a matter of putting a t-peice in the top vacuum line coming from that little black box on firewall on drivers side 7 bobs your uncle?

Cheers

Noel

re Boost guage Yes that is how you do it, it is pretty simple. Bob's not my uncle.. lol

Check http://www.skylinesaustralia.com/forums/in...howtopic=142207 for some pics of one way of putting a bleeder in.

tigr33 Collaborator

tigr33

Posted
Posted

i recently installed a turbotech boost controller n ripped out the old solenoid, just used the tube off the turbo and the 1 going in2 the cooler piping....

as for the boost gauge, i d/c the 1 in the cluster (its goes to the plenum), the 2 power cables, 1 u earth and other i just tapped into the accessories on my ciggy lighter

tip: may want to get ur boost controller on first n make sure it runs right be4 u install the boost controller (just so u dont overboost it)

hope that helps

Noel Community Regular

Noel

Posted
  • Author
Posted
i don't use the restrictor. holds 14psi pretty well.

i heard if you take it out spool up will be a bit slower as wastegate creep increases...makes sense in re to std form via solanoid bleed but using turbotech should not affect this as it will be restricting flow itself thus decreasing creep just as brass restictor does correct?

Noel Community Regular

Noel

Posted
  • Author
Posted
i recently installed a turbotech boost controller n ripped out the old solenoid, just used the tube off the turbo and the 1 going in2 the cooler piping....

as for the boost gauge, i d/c the 1 in the cluster (its goes to the plenum), the 2 power cables, 1 u earth and other i just tapped into the accessories on my ciggy lighter

tip: may want to get ur boost controller on first n make sure it runs right be4 u install the boost controller (just so u dont overboost it)

hope that helps

so u left restrictor in place? what boost you running & how does it hold in re to creep/spiking/tailing off in higher rpms?

cheers

Noel Community Regular

Noel

Posted
  • Author
Posted
yup.

and leaving the restrictor in means that the lowest pressure you can run is higher.

Legend! that's exactly the information i was after...I might take it out then as i dont want to run much more than 7psi since i have stock dump & exhaust & I heard that the minimum boost with a turbotech is around 8-9psi but i am guessing thats with the restictor still in place.

Cheers

Noel

Munkyb0y Grand Master

Munkyb0y

Posted
Posted

the best way to adjust that valve closest to stock setting is to blow thru the bottom nipple and tighten the bolt to the point where u can just, with quite a bit of effort, get the air to go out the side nipple.

Noel Community Regular

Noel

Posted
  • Author
Posted (edited)

fitted turbotech last night...feels like a new car!!!

First pulled it apart & put flat side of spring to ball bearing...then wound it in til screw just put pressure on spring...on car this was 6psi holding all the way to redline

wound it in a bit more til i got to just on 9psi & it stays there but bleeds to either 8psi or just under in higher revs depending on which gear...does not spike at all except if say i knock it back to 2nd it jumps a touch but nothing crazy

one question why does the boost bleed off a touch in higher revs?

(FYI i have left restrictor in original line)

Edited by Noel

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Ben_D
      Wanted to buy R200 longnose LSD 3.9 ratio

      By Ben_D · Posted

      Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Ben_D
      Back for more after 18 years - and where are the longnose R200 LSDs?

      By Ben_D · Posted

      Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • sonicii
      G35 Control arm and Compression Rods into a V35 Skyline.

      By sonicii · Posted

      Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
×
×
  • Create New...