Jump to content
SAU Community

Recommended Posts

I will be goin down the hwy to meet cc coast guys at central mangrove then we will head inland we will not be on the putty as such we will then head north up to wollombi, there are no dirt roads and the roads are fine and a lot of fun stop being such a bunch of wimps . no loose gravel or anythin.

u wont need any resprays have done this road plenty of times with no hickups roads are very good fine for everyone!

Through Kulnura, buckety out to wollimbi??? Sometime i drive that way for fun at night, or the back way to Yarramalong, the roads arn't that bad up this end, but if you go that way, doesnt' it go to dirt?

I promise u no dirt roads on this cruise, all bitumen, not postin a route just yet gonna weigh up some options cause for return back to central coast for those who stay on after, its a lot of fun to drive an really scenic aswell, can just cruise along or have some fun either way it ll be a nice day

Luke

Yeh mate thats all good, just want to let people know its not like a maccas out there you usually have to wait a bit for food its a very busy place, its worth it but.

just to re assure people we are traveling down the newcastle - syd freeway till central mangrove then goin in land from there its basically the way into gosford

Sorry but im gonna have to postpone the cruise to a later date, gonna b really busy next couple of weeks with work and that.

i will be looking to do this either late december or early jan depending

Tinks an i are gonna organise a Wollongong cruise sometime in the new year aswell.

will keep everyone posted on wats goin on, wat dates suit people in late december?

Luke



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...