Jump to content
SAU Community

Hks 34gtt Coilvers, Kyb Front Shocks + Lowered Springs

Mr_G
 Share

Recommended Posts

Mr_G Mentor

Mr_G

Posted
Posted (edited)

Hey guys, finally finished exams and my garage needs a clean :rofl: So grab yourself a good buy whilst my dad annoys me to move my stuff out!

1) Set of 18" starcorp rims which have huge dish. Front: 18x8.5 +38 (265/35/18), Rear: 18x9.5 + 45 (235/40/18). Has good tread all the way round, potenzas on rear with 60% tread, however one has slight sidewall damage as there is a slight buldge in the tyre on the sidewall. Fronts have good tread, but are missmatched, one is potenza, one is yokohama DNA. Fronts have around 40% tread. $1200neg. Rims have NO MARKINGS! Suite Supra, soarer, 200sx, R32GTST, R33GTST, R34 GTT etc

post-8163-1163140764.jpg

post-8163-1163140748.jpg

2) S15 Trial front bar. Just needs to be sprayed, only trial fitted to my old s15, $200

post-8163-1163140694.jpg

post-8163-1163140706.jpg

5) HKS Hypermax D coilovers. Rear pair only, suite 33GTR, 34GTR, 34GTT Sedan & coupe. Height and damped adjustable with pilloball tops, awesome quality! $350 FIRM!

post-8163-1163140808.jpg

7) R33 GTST/GTR brake lights, both left and right. Suite buyers with cracked lenses. $130ono for the pair

post-8163-1163140682.jpg

post-8163-1163140670.jpg

8) Stock R33 rear muffler: $50ono

post-8163-1163140538.jpg

Parts located in Sydney Sutherland shire

Contact: Jason on 0423 324 906 / [email protected] / PM me

Edited by Mr_G
Mr_G Mentor

Mr_G

Posted
  • Author
Posted
Can you let me know how much u think the front coilover gonna be..

you only have the rear right..

Thats correct. The fronts of any r33 gtst, 34gtr or 33gtr will work together with the rear as the fronts are all interchangable between those models.

So you just need to source some fronts :rofl: But for $350, the back is cheap :D Nothing wrong with them, have the receipt from powerplay in whom i bought them from 2 weeks ago.

Mr_G Mentor

Mr_G

Posted
  • Author
Posted
Do ypu think powerplay sell the front one only..

How come you just bought the rear one and sell it again..

Bought a whole set, only needed the fronts. Hence rears are for sale. Nothing wrong with them at all. More than welcome to take a look in person at the shocks

  • 2 weeks later...
Mr_G Mentor

Mr_G

Posted
  • Author
Posted (edited)

I still have the coilovers. GTR Wing on hold. Also have front r34/r33 gtt/gts KYB Shocks with lowered springs on them. These are a little leaky, but someone can have them for $50

Edited by Mr_G

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • PranK
      2001 R34DE

      By PranK · Posted

      R34DE as in R34 with an RB25DE? So did you get this? Or you planning to?  I'm not really sure what you're saying. 
    • Dose Pipe Sutututu
      What should I do next to hold the head on

      By Dose Pipe Sutututu · Posted

      Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Dose Pipe Sutututu
      boost source Size Garrett gt28 gen2

      By Dose Pipe Sutututu · Posted

      Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
×
×
  • Create New...