Jump to content
SAU Community

Recommended Posts

Hi all,

I'm selling a pair of ball bearing Garrett turbos to suit RB26DETT - GTRs. They come complete with 1bar rated actuators, modified oil drain flange pipes, and most gaskets, so all you need to fit is maybe a few gaskets and some patience!

I purchased these turbos not long ago, they're the only reason i'm selling them is that they're probably a little too big and therefor laggy for my current plans. That an i got an exhaust leak and i have had to remove them!!! ;):rofl: If sold i'll probably be going through the headache of a big single conversion.

Turbos are located in Townsville North QLD and i'll pay the freight to anywhere in australia if they're sold. and if i get a good price i'll even throw in brand-new un-used genuine nissan head-manifold gaskets.

They're rated at 320hp a piece and the part/chra number is 707160-005. According to the retailer that sold them to me theyre similar spec to the GT28RS but with smaller housings.

They come on like a freight train at 4-5k and above 5k they keep going and going.. They've never really gotten a proper chance to perform in my car, but I have done a 12.1 at 114mph with around 1 bar.. but they were maxing the injectors out pretty hard for most of the strip! Capable of soo much more!

Theyve seen less less than 4,000 kms of use i'd estimate.

If no one offers a reasonable amount they'll be refitted to the car.

More specs at :

http://www.turbobygarrett.com/turbobygarre...0R_707160_5.htm

I'm looking for offers around the $2,500 mark, which is lots less than what i paid not long ago. Call me and lets talk.

Please contact me, preferably ASAP and by phone, coz soon i'll be too tempted to fit them back to my car.

Call, 0402.701.181.

Cheers

Rob

Here is a picture of one of them next to my an original standard gtr turbo.

post-21092-1163219734.jpg

Link to comment
https://www.sau.com.au/forums/topic/142862-fs-twin-turbo-gt2560rs-near-new/
Share on other sites

A mate of mine tuned an R33 GTR, which had a pair of these and it managed an impressive 410kw at the wheels with these turbos on 1.8bar. This shows with a few mods these should be the last turbos you'll ever need to buy.

:pirate:

A mate of mine tuned an R33 GTR, which had a pair of these and it managed an impressive 410kw at the wheels with these turbos on 1.8bar. This shows with a few mods these should be the last turbos you'll ever need to buy.

:pirate:

wow thats unreal power! so would these be better than gt2860r with -5 version?

i can vouch for these turbos!

i have a set on my GTR and with a full turbo back exhaust and boost, the car ran 11.7 (on 4 occasions)

good luck with the sale mate - very good price!

cheers Garth

jebus, someone loan me the money. these would be perfect for my RB30/26 engine.

*shakes fist at buying house before finishing engine*

let me know if no one takes em before u refit them to your car, ill try and sell something or beg for money to buy them off you.

cheers

Daniel

Hi all,

I'm selling a pair of ball bearing Garrett turbos to suit RB26DETT - GTRs. They come complete with 1bar rated actuators, modified oil drain flange pipes, and most gaskets, so all you need to fit is maybe a few gaskets and some patience!

I purchased these turbos not long ago, they're the only reason i'm selling them is that they're probably a little too big and therefor laggy for my current plans. That an i got an exhaust leak and i have had to remove them!!! :no::P If sold i'll probably be going through the headache of a big single conversion.

Turbos are located in Townsville North QLD and i'll pay the freight to anywhere in australia if they're sold. and if i get a good price i'll even throw in brand-new un-used genuine nissan head-manifold gaskets.

They're rated at 320hp a piece and the part/chra number is 707160-005. According to the retailer that sold them to me theyre similar spec to the GT28RS but with smaller housings.

They come on like a freight train at 4-5k and above 5k they keep going and going.. They've never really gotten a proper chance to perform in my car, but I have done a 12.1 at 114mph with around 1 bar.. but they were maxing the injectors out pretty hard for most of the strip! Capable of soo much more!

Theyve seen less less than 4,000 kms of use i'd estimate.

If no one offers a reasonable amount they'll be refitted to the car.

More specs at :

http://www.turbobygarrett.com/turbobygarre...0R_707160_5.htm

I'm looking for offers around the $2,500 mark, which is lots less than what i paid not long ago. Call me and lets talk.

Please contact me, preferably ASAP and by phone, coz soon i'll be too tempted to fit them back to my car.

Call, 0402.701.181.

Cheers

Rob

Here is a picture of one of them next to my an original standard gtr turbo.

post-21092-1163219734.jpg

hi mate im not sure how much you paid for these turbos but when i had purchased them 8 months ago i paid $2200...i just looked through ebay and some1 is selling them for $2550 brand new.

but good luck with your sale

Sorry to the people who pm'ed i've been out of town for a few days.

I understand that 2.5k is a little on the exxy side what with the prices these are going for these days. And I'm willing to conceed that obviously its pointless expecting anywhere near the new price, but looking due to the fact that there is absolutlely nothing wrong with these units and added to that, the costs i have to meet to replace them means i could probably only go as low as $2300.

The only reason i'd be selling these is to convert to a single turbo setup and realistically i'm looking at over $4k to purchase what i need.

So I take it on board that $2500 is too much and i'll adjust the pricet to $2300.

Thanks for the replies.

Robbo.

  • 2 weeks later...

MrFlex the fact that these turbos retail for $2500 a pair has already been noted.. Please read the thread, but thanks for the bump.

Unfortuantly I've decided to keep them, after a few very good offers, Ive decided to keep them anyway. The cost to replace them is just too much for me at the moment, these are good turbos, just a little excessive for what i want at present.

Thanks again to the people who made legitimate offers.

Cheers,

Robbo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
×
×
  • Create New...