Jump to content
SAU Community

Recommended Posts

Hi all,

I'm selling a pair of ball bearing Garrett turbos to suit RB26DETT - GTRs. They come complete with 1bar rated actuators, modified oil drain flange pipes, and most gaskets, so all you need to fit is maybe a few gaskets and some patience!

I purchased these turbos not long ago, they're the only reason i'm selling them is that they're probably a little too big and therefor laggy for my current plans. That an i got an exhaust leak and i have had to remove them!!! ;):rofl: If sold i'll probably be going through the headache of a big single conversion.

Turbos are located in Townsville North QLD and i'll pay the freight to anywhere in australia if they're sold. and if i get a good price i'll even throw in brand-new un-used genuine nissan head-manifold gaskets.

They're rated at 320hp a piece and the part/chra number is 707160-005. According to the retailer that sold them to me theyre similar spec to the GT28RS but with smaller housings.

They come on like a freight train at 4-5k and above 5k they keep going and going.. They've never really gotten a proper chance to perform in my car, but I have done a 12.1 at 114mph with around 1 bar.. but they were maxing the injectors out pretty hard for most of the strip! Capable of soo much more!

Theyve seen less less than 4,000 kms of use i'd estimate.

If no one offers a reasonable amount they'll be refitted to the car.

More specs at :

http://www.turbobygarrett.com/turbobygarre...0R_707160_5.htm

I'm looking for offers around the $2,500 mark, which is lots less than what i paid not long ago. Call me and lets talk.

Please contact me, preferably ASAP and by phone, coz soon i'll be too tempted to fit them back to my car.

Call, 0402.701.181.

Cheers

Rob

Here is a picture of one of them next to my an original standard gtr turbo.

post-21092-1163219734.jpg

Link to comment
https://www.sau.com.au/forums/topic/142862-fs-twin-turbo-gt2560rs-near-new/
Share on other sites

A mate of mine tuned an R33 GTR, which had a pair of these and it managed an impressive 410kw at the wheels with these turbos on 1.8bar. This shows with a few mods these should be the last turbos you'll ever need to buy.

:pirate:

A mate of mine tuned an R33 GTR, which had a pair of these and it managed an impressive 410kw at the wheels with these turbos on 1.8bar. This shows with a few mods these should be the last turbos you'll ever need to buy.

:pirate:

wow thats unreal power! so would these be better than gt2860r with -5 version?

i can vouch for these turbos!

i have a set on my GTR and with a full turbo back exhaust and boost, the car ran 11.7 (on 4 occasions)

good luck with the sale mate - very good price!

cheers Garth

jebus, someone loan me the money. these would be perfect for my RB30/26 engine.

*shakes fist at buying house before finishing engine*

let me know if no one takes em before u refit them to your car, ill try and sell something or beg for money to buy them off you.

cheers

Daniel

Hi all,

I'm selling a pair of ball bearing Garrett turbos to suit RB26DETT - GTRs. They come complete with 1bar rated actuators, modified oil drain flange pipes, and most gaskets, so all you need to fit is maybe a few gaskets and some patience!

I purchased these turbos not long ago, they're the only reason i'm selling them is that they're probably a little too big and therefor laggy for my current plans. That an i got an exhaust leak and i have had to remove them!!! :no::P If sold i'll probably be going through the headache of a big single conversion.

Turbos are located in Townsville North QLD and i'll pay the freight to anywhere in australia if they're sold. and if i get a good price i'll even throw in brand-new un-used genuine nissan head-manifold gaskets.

They're rated at 320hp a piece and the part/chra number is 707160-005. According to the retailer that sold them to me theyre similar spec to the GT28RS but with smaller housings.

They come on like a freight train at 4-5k and above 5k they keep going and going.. They've never really gotten a proper chance to perform in my car, but I have done a 12.1 at 114mph with around 1 bar.. but they were maxing the injectors out pretty hard for most of the strip! Capable of soo much more!

Theyve seen less less than 4,000 kms of use i'd estimate.

If no one offers a reasonable amount they'll be refitted to the car.

More specs at :

http://www.turbobygarrett.com/turbobygarre...0R_707160_5.htm

I'm looking for offers around the $2,500 mark, which is lots less than what i paid not long ago. Call me and lets talk.

Please contact me, preferably ASAP and by phone, coz soon i'll be too tempted to fit them back to my car.

Call, 0402.701.181.

Cheers

Rob

Here is a picture of one of them next to my an original standard gtr turbo.

post-21092-1163219734.jpg

hi mate im not sure how much you paid for these turbos but when i had purchased them 8 months ago i paid $2200...i just looked through ebay and some1 is selling them for $2550 brand new.

but good luck with your sale

Sorry to the people who pm'ed i've been out of town for a few days.

I understand that 2.5k is a little on the exxy side what with the prices these are going for these days. And I'm willing to conceed that obviously its pointless expecting anywhere near the new price, but looking due to the fact that there is absolutlely nothing wrong with these units and added to that, the costs i have to meet to replace them means i could probably only go as low as $2300.

The only reason i'd be selling these is to convert to a single turbo setup and realistically i'm looking at over $4k to purchase what i need.

So I take it on board that $2500 is too much and i'll adjust the pricet to $2300.

Thanks for the replies.

Robbo.

  • 2 weeks later...

MrFlex the fact that these turbos retail for $2500 a pair has already been noted.. Please read the thread, but thanks for the bump.

Unfortuantly I've decided to keep them, after a few very good offers, Ive decided to keep them anyway. The cost to replace them is just too much for me at the moment, these are good turbos, just a little excessive for what i want at present.

Thanks again to the people who made legitimate offers.

Cheers,

Robbo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...