Jump to content
SAU Community

R33 Tuning Questions. And R34 Questions.

markimak

By markimak,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

markimak Grand Master

markimak

Posted
Posted (edited)

hi all.

im thinking of selling up my GTR to purcahse a R33 GTST or R34.

how much power at the wheels does the R33 have stock and the R34 GTT stock?

estimated power of R33 with turbo back exhast, FMIC?

estimated power of R33 with turbo back exhast, FMIC, boost and PFC on base map?

i have done a search and nothing has come up with adequate answers. im new to R33 levels. and realised how much more doughier they are than a GTR. any answers would be great.

oh and how much boost can the stock turbo take?

thanks in advance

mark.

Edited by markimak
nizmo_freek Experienced

nizmo_freek

Posted
Posted
hi all.

im thinking of selling up my GTR to purcahse a R33 GTST or R34.

how much power at the wheels does the R33 have stock and the R34 GTT stock?

estimated power of R33 with turbo back exhast, FMIC?

estimated power of R33 with turbo back exhast, FMIC, boost and PFC on base map?

i have done a search and nothing has come up with adequate answers. im new to R33 levels. and realised how much more doughier they are than a GTR. any answers would be great.

oh and how much boost can the stock turbo take?

thanks in advance

mark.

1:Why do you want to sell your gtr and buy a gtst??

2:The r33 gts25t makes around 130-140rwkw stock (not sure about the r34 gtt but probally around 150-160rwkw but the r34 is also alot heavier than the r33.Factory power ratings at the flywheel are: r33 gts25t=187kw, r34 gtt=206kw.

3:160-170rwkw

4:Should be around 190-210rwkw with a tuned PFC, power levels will vary depending on the condition of the car etc etc.

I wouldnt go above 12-13psi on the stock tubo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...