Jump to content
SAU Community

4wd Fuse Stagea

cyrilsnooker

By cyrilsnooker,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Ska Grand Master

Ska

Posted
Posted

See that search thingy in the top right-hand corner, next time try that first.

The 4wd system is the same type as r33/r34 gtr, meaning the only way to safely go into rwd is to remove the front driveshaft..........

How many times must this be disscussed, can people not find the search?

Link to comment
https://www.sau.com.au/forums/topic/144944-4wd-fuse-stagea/#findComment-2706678
Share on other sites
GoldZilla Grand Master

GoldZilla

Posted
Posted
Hi i have a 1999 RS4 turbo 4 wheel drive and was wondering if anyone knew if by putting a switch in to the 4 wheel drive fuse and taking it from 4 to rear wheel drive CAN IT HAVE ANY DETREMENTAL EFFECTS ON THE CAR . COULD IT HARM THE CENTRE DIFF ?

Yes it can be harmful. Basically, the Stagea version of ATESSA is similar to the R33 and R34 Skylines and GT-Rs, so there isn't just a fuse you can pull, like in the R32 version.

There has already been plenty written about this, here's one pointer in the right direction: http://www.skylinesaustralia.com/forums/in...howtopic=102172

Link to comment
https://www.sau.com.au/forums/topic/144944-4wd-fuse-stagea/#findComment-2706691
Share on other sites
Ska Grand Master

Ska

Posted
Posted

Did a search for:

*rwd* switch *4wd*

Got the following results:

http://www.skylinesaustralia.com/forums/in...d*+switch+*4wd*

http://www.skylinesaustralia.com/forums/in...=123363&hl=

http://www.skylinesaustralia.com/forums/in...=102172&hl=

http://www.skylinesaustralia.com/forums/in...=114543&hl=

http://www.skylinesaustralia.com/forums/in...=105015&hl=

http://www.skylinesaustralia.com/forums/in...c=76525&hl=

http://www.skylinesaustralia.com/forums/in...c=84959&hl=

http://www.skylinesaustralia.com/forums/in...c=74841&hl=

You will find all your answerws in those :domokun:

Happy reading :)

Link to comment
https://www.sau.com.au/forums/topic/144944-4wd-fuse-stagea/#findComment-2706708
Share on other sites
Tangles Grand Master

Tangles

Posted
Posted
noobs and their questions pfffft

LOL :D just what mother used to say

out of a matter of interest, say you did pop the fuse only and drive it into the ground, I think youd find a VERY expensive repair bill at the end of it. Same expense as rebuilding the engine................... I know what Id rather do

Link to comment
https://www.sau.com.au/forums/topic/144944-4wd-fuse-stagea/#findComment-2709633
Share on other sites
cyrilsnooker Rookie

cyrilsnooker

Posted
  • Author
Posted
See that search thingy in the top right-hand corner, next time try that first.

The 4wd system is the same type as r33/r34 gtr, meaning the only way to safely go into rwd is to remove the front driveshaft..........

How many times must this be disscussed, can people not find the search?

Thanks for the tip STEVE

Link to comment
https://www.sau.com.au/forums/topic/144944-4wd-fuse-stagea/#findComment-2711737
Share on other sites
cyrilsnooker Rookie

cyrilsnooker

Posted
  • Author
Posted
Yes it can be harmful. Basically, the Stagea version of ATESSA is similar to the R33 and R34 Skylines and GT-Rs, so there isn't just a fuse you can pull, like in the R32 version.

There has already been plenty written about this, here's one pointer in the right direction: http://www.skylinesaustralia.com/forums/in...howtopic=102172

Thanks for the tip Steve

Link to comment
https://www.sau.com.au/forums/topic/144944-4wd-fuse-stagea/#findComment-2711739
Share on other sites
cyrilsnooker Rookie

cyrilsnooker

Posted
  • Author
Posted

THANKS FOR THE TIP STEVE

Link to comment
https://www.sau.com.au/forums/topic/144944-4wd-fuse-stagea/#findComment-2711742
Share on other sites
cyrilsnooker Rookie

cyrilsnooker

Posted
  • Author
Posted
LOL :) just what mother used to say

out of a matter of interest, say you did pop the fuse only and drive it into the ground, I think youd find a VERY expensive repair bill at the end of it. Same expense as rebuilding the engine................... I know what Id rather do

THANKS FOR YOUR HELP STEVE

Link to comment
https://www.sau.com.au/forums/topic/144944-4wd-fuse-stagea/#findComment-2711747
Share on other sites
cyrilsnooker Rookie

cyrilsnooker

Posted
  • Author
Posted
LOL :) just what mother used to say

out of a matter of interest, say you did pop the fuse only and drive it into the ground, I think youd find a VERY expensive repair bill at the end of it. Same expense as rebuilding the engine................... I know what Id rather do

THANKS STEVE

Link to comment
https://www.sau.com.au/forums/topic/144944-4wd-fuse-stagea/#findComment-2711754
Share on other sites
GoldZilla Grand Master

GoldZilla

Posted
Posted
Thanks for the tip STEVE
Thanks for the tip Steve
THANKS FOR THE TIP STEVE
THANKS FOR YOUR HELP STEVE
THANKS STEVE

I looked at these and wondered: "WTF is he calling us all Steve for? Is this some sort of sarcasm?"

Then I realised you meant:

Thanks for the tip,

Steve

Link to comment
https://www.sau.com.au/forums/topic/144944-4wd-fuse-stagea/#findComment-2712557
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Nizzy_R34
      r34's love to squeal

      By Nizzy_R34 · Posted

      just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • Duncan
      Engine sputter

      By Duncan · Posted

      My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Duncan
      S1 Autech 260RS Wiring Diagrams

      By Duncan · Posted

      Awesome, thanks for sharing!
    • Duncan
      Nissan fuga 450gt android screen

      By Duncan · Posted

      To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • GTSBoy
      Nissan fuga 450gt android screen

      By GTSBoy · Posted

      So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...