Jump to content
SAU Community

Recommended Posts

Just to let everyone know that the heat has brought out the thieving element in force!

I work on Constitution Ave up near the defence offices. At some stage today there were multiple break-ins which were done by smashing windows rather than the old screwdriver in the lock trick. My genius office manager heard several alarms going off but was too stupid to say or do anything (she is closest to the street side windows)!!!

I would not be suprised if they also hit the easy pickings of the big open defence carparks.

Luckily for me I catch the bus Mon-Fri and just use my baby for weekend fun (dirty pun unintended). Pitty that this kind of topic has to be my first post but I thought everybody ought to know.

So be on the lookout and hope for the best but always plan for the worst.

Link to comment
https://www.sau.com.au/forums/topic/145264-thieving-pricks/
Share on other sites

Wagga has had heaps of break in and home invasions over the past week, as well as a few cars going missing and heaps broken into (around here its usually a broken window).

When I had to park in "uncovered" parks, I always had a bomb just to drive there, a clublock just to make niking it a little bit harder and left it open. It was gone through a few times, but never went missing.

It sucks that you can't just drive whatever you want to work though.

Link to comment
https://www.sau.com.au/forums/topic/145264-thieving-pricks/#findComment-2716291
Share on other sites

Somone stole my Crome RAY's Tyres valvecaps off my rims the other day. i was pissed because i can't get replacements. i know there not realy anything important but thats beside the point.

Edited by Viper_r32
Link to comment
https://www.sau.com.au/forums/topic/145264-thieving-pricks/#findComment-2721969
Share on other sites

That sucks!! Would it be cause it is school/uni holidays so people are out bored and looking for something to entertain themselves with?

it could be, but i think mine were stolen when i was parked at the CIT car park. thats twice i've had stuff stollen from that carpark. first all my audio gear. will it ever end..........

Link to comment
https://www.sau.com.au/forums/topic/145264-thieving-pricks/#findComment-2722740
Share on other sites

Guest 180Chick

That really does suck! You spend all this time and money on your car and someone just takes it away from you. I spent all this money on Soundsteam gear and it was stolen out of the garage! Pissed me off considering it took us ages to save up for that gear and it was top of the line and a lot of it!!!

I just hope that nothing gets stolen from anyone else so everyone can enjoy their Christmas!!

Link to comment
https://www.sau.com.au/forums/topic/145264-thieving-pricks/#findComment-2723336
Share on other sites

That really does suck! You spend all this time and money on your car and someone just takes it away from you. I spent all this money on Soundsteam gear and it was stolen out of the garage! Pissed me off considering it took us ages to save up for that gear and it was top of the line and a lot of it!!!

I remember reading about that on the forms a wile ago, man it sucks. I’m still trying to replace all my gear. It’s like you said it takes forever to save up for the good stuff. As I don’t like to by the cheap gear either. Then add that on top of every thing else that needs to be done, engine mods, gauges ect…….. I need a better paying job!

Link to comment
https://www.sau.com.au/forums/topic/145264-thieving-pricks/#findComment-2723855
Share on other sites

Guest 180Chick

Yeah I am currently working three jobs (while doing a law degree mind you) and really upsets me knowing that someone who probably has never had a job in his/her life has got my $20k worth of soundsteam gear! The police knew who it was that stole it and was able to get back jewellery and other things but unfortunetaly my gear seemed to have been so hot that it got passed on really quickly.

Just really annoying when you work so hard to get top stuff for something you love (in this situation, your car) and then someone who deserves something from the gutters gets it all.

Link to comment
https://www.sau.com.au/forums/topic/145264-thieving-pricks/#findComment-2724850
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...