Jump to content
SAU Community

Recommended Posts

Hi,

1989 R32 Nissan Skyline GTR, Twin turbo, 5 speed manual, Black in colour, Car is mechanically is in A1 condition, body/paint condition is excellent, this is a weekend car only get driven once or twice a week

Vehicle 1989 NISSAN SKYLINE HR32 GTR

Price $29,500 Or Nearest Offer

Kilometres 76,xxx

Body 2 door 4 seat COUPE

Colour Black

Interior Colour Black/Grey

Transmission 5 speed Manual

Drive type 4WD

Engine 6 cylinder Petrol Turbo 2.6L (2598cc)

Reg Plate YBN-45S

Reg Expiry 30 MAY-2007

Modifications are as follows;

Tein Coilover

3 1/2" exhaust

Twin plate clutch

Trust T51 turbo

Alpine MP3 system

R34 GTR rim + pirelli tyres still has 99% tread left

Alarm/windows lifters + immoboliser

HKS SSQV blow off valve

Turbo timer

K&N air filter

Mines ECU

Autometer boost, water and oil gauges

The car is immaculate condition inside and out the photo does not do this car justice :action-smiley-069:

Contact

Tao on 0410 486 808

Please serious buyers only.

front.jpg

rear.jpg

interior2.jpg

interior.jpg

enginebay.jpg

wheel.jpg

Edited by nuganen
Link to comment
https://www.sau.com.au/forums/topic/146625--/
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...