Jump to content
SAU Community

Recommended Posts

Hi,

i have a R33 series 2 GTST, i like the standered front and front lip but i was looking to change the rear bar and mayb side skirts. but from what ive seen around there isnt many differences in rear bars and side skirts?

what have u out there got? plz post some pics for some ideas

Also who has carbon fibre bonnets for ue R33? any pics? Just wondering can u get the standered Series 2 bonnet but in carbon fibre?

thanks

Edited by Adz2332
  • 2 weeks later...

If your looking for new front bar and body kits in general unique auto sports sell all that thay also do c/f bonnets but the c/f bonnets are only carbon fiber on top layer fiber glass and plastic bottom half

but still look good and reduces weight.

If you need pics of silver s2s with kits etc etc.. check out my thread.. heaps of different pics in there with kits and carbon bonnets etc etc..

I have posted a pic of a s2 with carbon bonnet on page 5 i think (from memory)-- hes on this forum -- R33 S2 i think!! pm him if you want more pics..

but heres the thread..

http://www.skylinesaustralia.com/forums/in...howtopic=136226

^^ just go thru all the pages.. you will find something..

but from what ive seen around there isnt many differences in rear bars and side skirts?

You sure about that lol?? there are heaps of different styles dude- trust me..

go for the 400r skirts, and gtr rear pods!! :cool:

anyways hundreds off pics in that link!!

Gdluck

btw.. that east bear bonnet will be 100% fitment unlike others.. I mean they do fit, but one side is always closer than the other.. But aint cheap for east bear stuff!!

Edited by siddr20

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...