Jump to content
SAU Community

Clay Bar

Mr. Keets

By Mr. Keets,
in Western Australia

 Share

Recommended Posts

MANWHORE Grand Master

MANWHORE

Posted
Posted

Mate, check out all of the usual shops. If they don't have it, ask them to get it in for ya.

I just bought a meguirs claying kit. $35 at supericerauto. Autobarn also have it. I am in sydney, but all of the shops should be the same.

I am yet to have used it, but going by meguir's track record, I find that their prep products are OK. I just don't like their waxes, because they don't last very long.

Link to comment
https://www.sau.com.au/forums/topic/148376-clay-bar/#findComment-2769998
Share on other sites
Mr. Keets Grand Master

Mr. Keets

Posted
  • Author
Posted

Not yet...tomorrow morning when the moon is still high I shall anoint the R with my Zymol shampoo then loving massage the clay bar about its lithe form...then repeat. Once the body is cleansed and free from blemishes only then shall I release the awsome-a-powa of the zymol cannuuuuuuba wax. Should take about 3hrs. :teehee:

Link to comment
https://www.sau.com.au/forums/topic/148376-clay-bar/#findComment-2771312
Share on other sites
fr0st Experienced

fr0st

Posted
Posted

Don't forget a light cutting. Claying brings out heaps of little scratches because you removing all the contaminants and crap that fill them up. (can't remember what there called.... looks like spider webbing on your paint)

Canuba should cover them up a bit but cutting will give it that flawless shiny finish in the end

Link to comment
https://www.sau.com.au/forums/topic/148376-clay-bar/#findComment-2771358
Share on other sites
Mr. Keets Grand Master

Mr. Keets

Posted
  • Author
Posted

Hey! my car aint no emo LOL. Its rock n roll baby...ok a bit indy pop but definately not emo.

My car had a thorough detailing by that guy in willeton whos name currently escapes me...Stefan, I think not that long ago..I'll see how i go as i dont really want cut it just yet.

Link to comment
https://www.sau.com.au/forums/topic/148376-clay-bar/#findComment-2771505
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...