Jump to content
SAU Community

Recommended Posts

Hey man, yeah i htought maybe rich and retard? but even on stock boost :S

I have a SAFC NEO comming but now think i should have spent the extra on a PFC>

I have a mate who offered to let me try his PFC to see if that sorts anyhting out, ill let u know how i go in a day or two after we have tried it.

The hesitation in mine is really sever, overtaking commodores is impposibble and imbarassing.

Mine is very noticable.But opens up again after 5000RPM.Due to a defect i have a standard zorst on.But get my other one back tomorrow.Ill let you know if this does anything also.But yeh very interested in the ECU swap.Keep me posted.

CHEERS

perhaps someone could donate a pfc from a car with similar mods and a richish tune, see what happens. i wouldnt try it for too long though with the wrong ecu thats just asking for trouble. it need only be a 5 minute swap. If it works its your ecu, if not, its a sensor or boost problem.

really does sound like management, but management does some funny things with the wrong sensor readings so it may not be the ecu.

thats all i got guys sorry. Maybe MANWHORE can help nytsky out your both in syd

After i got my exhaust back today(fujitsubo 3inch) it felt alot better.But can still feel a little bit of hesitation between 3 and 5k.Alot smoother but still there.

Im in the process of getting an FC(i bloody hope) so ill get it on the dyno and find out for sure.

hi guys got it fixed yesterday

on the dyno made 128 rwhp

fixed-

replaced fuel pressure regulator

replaced airflow sensor ( the 3 i tried previously where dodgy)

for some reason timming is quiet advanced because hte car didnt want to do any hting on the standard base timing? dont know why?

After tune made 270.9 rwhp or 202 rwkw ! very happy!

The air fuel ratio is still very rich according to the tuner, Tuner says when my SAFC neo comes should be good for over 300 rwhp.

Total mods are-

-walbro fuel pump

-metal intake pipe.

-pod filter

-boost 10psi

-dump back exuast

-Delta fin fmic

-stock turbo and stock ecu

-oil catch can

Pretty happy with tune so far

Edited by tmc_2
hi guys got it fixed yesterday

on the dyno made 128 rwhp

fixed-

replaced fuel pressure regulator

replaced airflow sensor ( the 3 i tried previously where dodgy)

for some reason timming is quiet advanced because hte car didnt want to do any hting on the standard base timing? dont know why?

After tune made 270.9 rwhp or 202 rwkw ! very happy!

The air fuel ratio is still very rich according to the tuner, Tuner says when my SAFC neo comes should be good for over 300 rwhp.

Total mods are-

-walbro fuel pump

-metal intake pipe.

-pod filter

-boost 10psi

-dump back exuast

-Delta fin fmic

-stock turbo and stock ecu

-oil catch can

Pretty happy with tune so far

Holy crap thats a huge increase.Where did you get it done?And how much?

How did he tune it exactly if you done have a SAFC or power FC to tune it with?

well she definatly is not a stock turbo, especialy on an R33. I have just managed to squize 200rwkw out of mine at 10psi with all the mods and SAFC II. that is at 10psi, i guess top would be about 210rwks if all goes well at 12 psi. what boost are you running.

You sure those figures are at the wheels. not at the crank?

well she definatly is not a stock turbo, especialy on an R33. I have just managed to squize 200rwkw out of mine at 10psi with all the mods and SAFC II. that is at 10psi, i guess top would be about 210rwks if all goes well at 12 psi. what boost are you running.

You sure those figures are at the wheels. not at the crank?

He got such a increase beacue the car was running so fcked and had to fix the stuffed things.

For some reason timming is in an advanced position bacuse the car wouldnt do much wiht stock base timing, the air fuel ratio is still way rich. the power figures where at the wheels and as far as i can see its a stock turbo. Unless its had some sort of highflow job done to it??

I hear of other people wiht good nick r33 with similar mods cracking the 200rwkw mark???

Im running 10psi boost

Holy crap thats a huge increase.Where did you get it done?And how much?

How did he tune it exactly if you done have a SAFC or power FC to tune it with?

Got it done at FIST performance at wacol. Onyl work shop open after new years who would take my car with such late notice- i was not expecting the excellent service they gave me.

He basically just fixed my problems, u cant tune much with a stock ecu except base timming and make sure its all running ok.

Edited by tmc_2

i dont thin you have a high flow, if you had a highflow running 10psi your stock ecu would shit itself and you would be back to 128 or worse. 200kw is about right, its not really a number that means anything after all, actual figure could be + or - 50 but who cares, whatever that figure really is, you just doubled it. the increase is the only figure you can take from a dyno other than air/fuel ratio.

congratulations on finding the problems and having a car in top shape

i hope mine does that one day

i got 204kw with my stock turbo and ecu on 11psi. any higher and it hit R&R. my mate has 1 with 175kw and mine feels heaps better. before mine had the cooler put on and only had a cat back exhaust and was running 9psi it was a dead match for another mates car that had full exhaust, cooler and 11psi. i know that my turbo is stock, but i just think that my engine is healthy, and we had made a few "modifications" to get more power out of it.

now i have a remapped ecu and am running 13-14psi (still on stock turbo). while trying to sort out an idle missfire issue i put the old ecu back in and went back to 11psi. it felt like a grandma car. it was so boring. so i stuck the remaped ecu back in and wound the boost back up and it went back to being a fun car. i'm going to be getting a safc some time just to trim up the AFRs to get even more power. the remapped ecu is leaner than the stock ecu, but is still down around 11.4 at WOT at high rpm.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...