Jump to content
SAU Community

Recommended Posts

Originally bought the piping off Beer Baron here - http://www.skylinesaustralia.com/forums/in...c=143480&hl. Piping is exactly how beer baron describes it.

Looks much, much better than the stock stuff and apparently has some performance benefits as the pipes don't expand like the rubber ones under full boost. Plus the hoses are not as susceptible to blowing off as the stock ones are. The kit comes with the Greddy Alluminium hard pipes, silicone hoses and hose clamps. The hoses are ok, but have seen better days looks wise.

I'm asking 350 plus freight. Selling due to no longer owning an R33 GTR - ** NOTE: IT DOES NOT FIT R32 GTR **

I Also have a standard R33 GTR radiator fan in good condition - much better than R32 one, and will fit all RB water pumps.

Asking $50 pick up or $65 delivered Selling due to no longer owning R33.

Pair of Red Bride Brix seats with rails to suit R32/R33 etc, in perfect condition. Asking $1600 plus freight. Selling to update to a fixed back Bride and a Brix II.

New HKS SR20DET Inlet cam gear - SOLD.

S13 Cusco Adjustable Camber tops - SOLD.

**Please note Black Bride in Picture has already been sold.

S13 Hybrid Intercooler kit, with Turbosmart BOV - Asking $450.

Cheers

post-14525-1167869521.jpg

post-14525-1167869561.jpg

post-14525-1167869588.jpg

post-14525-1179058983_thumb.jpg

post-14525-1179059008_thumb.jpg

Edited by ookami
  • 2 weeks later...
  • 4 weeks later...

would this fit r32 GTR or not??? cause the coolers are very similar!

let know via pm if you can mate, thanks!

STILL FOR SALE???

very interested...

I have Pm'd you,Consider sold if still up for sale!!!

  • 1 month later...

Pms replied too. sorry for the late reply I haven't been on here since i sold my R33, still for sale.

Edited by ookami
Pms replied too. sorry for the late reply I haven't been on here since i sold my R33, still for sale.

if these replaces the stock items on the r33 gtr then consider them sold

how much posted to nsw 2218...if you're close ill come and pick em up.

cheers

jeff

  • 1 month later...
if these replaces the stock items on the r33 gtr then consider them sold

how much posted to nsw 2218...if you're close ill come and pick em up.

cheers

jeff

Sorry for the late reply I haven;t been on here for quite some time, yes they do replace standard rubber R33 piping with alloy solid piping. Could do it for $365 delivered.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...