Jump to content
SAU Community

Recommended Posts

>Classes -

>1. V8 - naturally aspirated and supercharged

>2. 6 cylinder- naturally aspirated and supercharged

>3. 4 and Rotor. - naturally aspirated and supercharged

>4. Outlaw- For any street registered car that is too radical to fit within class requirements.

>

>

>Racing will be run on a Quick4 format with all racers to recieve a minimum of 4 runs each per Class . On Sunday nite between 6.40pm and 7.00pm There will be the Finals wich will be decided by finding the quickest 2 entrants of each class to face off for the win and runner-up. Also with the 3rd and 4th quickest of each class to run for third place of thier nominated class.

>

>RULES-

>

>1. All competing vehicles are to have current registration.

>2. All vehicles must be of a satisfactory appearance

>3. Instant disqualification from round if fluids dropped onto racing surface.

>4. Helmet, long sleeved top and long pants required with fully enclosed foot wear.

>5. Current drivers License.

>6. Stewards decision is Final!

>7. No excessive static burnouts

>8. Where Slicks used on rear front tyres must be of conventional type. (no radials)

>9. Brakes , Safety Belts , tyres , lighting ect must all be in good condition.

>10. Where vehicle equipped with nitrous oxide a yellow 3 inch square must be displayed on top of front windscreen on drivers side.

>11. No excessive signwriting allowed .

>12. No passengers permitted. (driver only)

>13. Street equipment must be opperational, eg lights, indicators ect.

>14. All vehicles running in Drag Racing to display Sponsor Sticker to be entitled for Prizeminey!

>15. Where a driver displays unsafe conduct he/she will be disqualified from event!

>

>ALLOWANCES-

>

>1. Open pipes permitted

>2. Slicks permitted with an absolute maximum of 28" high and 10" tread.

>3. 20 second rule applies from time competitor stages until other lane must be staged.

>4. Vehicles are permitted to race with no roll cage providing car does NOT break 6.99 secs over the measured 1/8 mile.

>5. Qualifying is ET based times will still stand even if competitor red lights!

>6. Minimum of 6 cars per class needed or there will be no prizemoney for that class.

>7. Fastest 4 cars to make the finals of each class , vehicles need to be ready for back to back racing!

>

>Event run and organised by R2R Ready To Race!!!

>Contact- Jai Schluter on mobile - 0421 568 089

>email - [email protected]

Link to comment
https://www.sau.com.au/forums/topic/149974-drag-racing-at-albury-autofest/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...