Jump to content
SAU Community

Recommended Posts

Hi all,

For a stock gtr34 engine + intercooler + dump pipes.

With Apexi pfc +twin pot filters + 3'' front pipe back + 1.0bar of boost.

What's power figure at awkw or rwkw ?

0-100kph time ?

0-400m time ? street condition (with rear seat and spare wheel)

Thanks !!

Link to comment
https://www.sau.com.au/forums/topic/151022-gtr34-power-figure-with-some-mods/
Share on other sites

wow cool !!

but how come your 1/4 time is so quick compares to 0-100 time ??

others said, to run high 11s or flat 12.0s you should make at least around flat 4.0s for 0-100 ??

anyway, that's amazing for such simple mods. Hoped mine could do that too.... cheers

My 34 GTR has pretty much those mods trust intercooler ,power fc, cam gears, exhaust and intake mods stock turbos and engine etc has put out 345 awhp/260awkw or around 280-290rwkw and has run a best of 12.3 @ 112.5 mph but was squatting at the rear on launching off the line so could only do 2 sec 60 ft times really needs some suspension work i think, this was done on a pretty average track here in townsville on a warm night so should be able to get the 60 ft down to 1.7-1.8 and run high 11 sec, my blogg has a dyno sheet and a few photos http://gtr13.blogspot.com

Edited by gtr13

ohh boys.!! :P

i gotta do something about my car cause it really sucks to produce only 220 awkw with those mods !!!

so it didn't go like it should...cheezzz... I should bring it to somewhere else to have a proper tune...any suggestions guys???

Where and who's the real gtr34 tuner (in Melb) ?? .....cheers. :P

ohh boys.!! :happy:

i gotta do something about my car cause it really sucks to produce only 220 awkw with those mods !!!

That will depend on the dyno of the day dude , don't take to much notice of the power it makes, take it to the strip and see what trap speed you gat that will give a better indication of the average power tha car makes in the RPM you are using.

Stock turbos will not give you a lot of power up high but with mods you are listing you could see a high 11 or flat 12 pass.

I have less mods than you in mine but with HKS GTSS turbos + my car is heavier than yours and I still managed 11.8 at 118 mph.

well..., with the current mods and power (220 awkw, winter 15C)...mine did [email protected] on 20C day...SUCKS.. :O ... cause i've got twin plate as well...so no excuse at all..!!

I asked around, people told me to get it re-tune cause it should produce around 240-250 awkw and an easy flat 12s like you guys did !!....

It seemed showing me that i'd waisted money and trust on the previous tuner.. :D ..and it's about time to place another bet to win some decent records.. :cool:...hopefully........

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...