Jump to content
SAU Community

Recommended Posts

hey guys.

ive noticed recently, that everytime i wash my car and chamois it, it leaves stains on the paint work, and the only way you can get rid of it, is to poilish it out. :whistling:

as i said, its only been happening since december, after i took it to a place to get washed.

any ideas?

re-spray is on the cards, but what can i do in the meantime? cbf polishing it all the time..

and if you want pics, i might be able to organise some..

car is a Black r32 gtst..

thanks in advance.

jarryd

EDIT: could this be caused by carwashes usuing recycled water?

i might have to do a test at home by using tap water.

f**king water restrictions.

Link to comment
https://www.sau.com.au/forums/topic/151135-white-stains-on-paintwork/
Share on other sites

I have a black R33 - dark coloured cars show water stains and residue a lot more than lighter coloured cars.

I find that washing the car in sections and rinsing helps prevent the stains appearing (ie: wash roof and windows - rinse car, wash mid section - rinse car, wash lower section - rinse car). Also the sooner you can get the water off the car with a chamois after washing, the better

If you've still got marks, you could try using Meguiars Quick/Speed Detailer on a cloth and give the car a wipe over...

strange, perhaps its the polish your using or they used.. dried white not clear? hit it up with some tek wax and see how she comes up

i use tech wax to fix it up lol

its kinda dried on. ill try get some pics up.

yeh try some diff cleaning products and see how thtgoes.

i only use meguiars, so i dont think thats it...

is it all over the car and consistant...if only in certain areas maybe somethin has landed upon ur car like a chemical or something...or maybe some1 has sprayed ur car with something nasty

dunno wat else it could be, if it was polish is should be polished back of for "good" once u re-polish the car, only thing else i could think of is maybe after a polish u missed certains spots...left it in the sun and the polish has so to speak "baked" itself onto ur paint , then once u polish it off, the new polish shins it over until its fully come off/sprayed off with water

Edited by Ricos

Yeah thats weird then dude... Real upsetting actually..

maybe hit those spots with a buffer next time? strange if you ask me .. Make sure you hose of excess soaps quickly and always wash your car early morning or night to avoid mid day temps to evaporate valuable leftover water (leaving marks)

hmmmm....must have been this place i took it to then...

but what can i do now, when it happened i took it back the nextr day and they polished it out.

it sucks.

well, re-spray is coming sooner then hey..

thanks for your help ppl

;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...