Jump to content
SAU Community

Recommended Posts

Hi, Does anyone know what the normal current draw is on an R33 GTS-t with the engine off and all accessories (alarms, interior lights etc...) off?

I am currently getting around 220mA and think this is the reason why my car has killed 2 Exide evolution 550cca batteries in 2 years.

I have tried pulling fuses with an ammeter attached and find that the current draw drops 220mA to 130mA when the main 63A fuse is pulled, the alarm is drawing about 30mA when not activated, all other fuses don’t seem to drop the current draw by that much??

I am currently getting the alternator checked out as It may not be charging to its full potential, although it is getting 14.1 when car is cold and 13.9 when car has warmed up.

Does anyone have any other ideas? As this problem is really annoying as I cannot leave my car for more than 3 or 4 days without starting it or the battery dies.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/151409-current-draw/
Share on other sites

Yeah ive got the same problem. leave the car for a week or so and the battery dies. ive gone through two batteries in as many months. my alternator is fine and i dont have an alarm or immobiliser or anything that would draw power while the car is off. just cant work it out. :P

Link to comment
https://www.sau.com.au/forums/topic/151409-current-draw/#findComment-2819712
Share on other sites

Found out now that the atenator is OK and with the doors locked current draw drops to about 150mA and then drops to 80mA with the Ignition fuse pulled.

My work commodore pulls about 10mA when everything is locked and off so 150mA still seems high??? Does anyone have any ideas?

Link to comment
https://www.sau.com.au/forums/topic/151409-current-draw/#findComment-2822109
Share on other sites

Yep, The reason the Alt will read 13.9V when first started as it has to try and recharge the battery - and as the charge level of the battery rises - so does the voltage.

Charge Rates are acceptable from 13.4V up to 14.5V in new cars.

Common faults are like boot lights and glove box lights. But I would be more enclined to look at the possibility that the stereo may be hooked up to a constant supply - (can you manually turn it on with the keys out of the ignition?) or the alarm system has a internal fault - which can happen also.

Cheers

Sumo

Link to comment
https://www.sau.com.au/forums/topic/151409-current-draw/#findComment-2826054
Share on other sites

Sounds like you need to keep pulling fuses until you work out exactly where the current 'leak' is, and then work out exactly what components take power from it.

Is the main fuse under the bonnet? Have you tried pulling every fuse under the dash to see if it is a smaller one down the line which is causing the fault?

Link to comment
https://www.sau.com.au/forums/topic/151409-current-draw/#findComment-2826983
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...