Jump to content
SAU Community

Recommended Posts

Hey,

I want to put my car on the Dyno although, I'm not too sure where I should take it too. Anyone have any good suggestions? I live in Logan.

I think all that needs to be fixed at the moment is the timing it seems to be just a tad out. The car hasn't been Dynoed at all and thats even after the rebuild which was only a few months ago, so I'd like them just to check over the car as well, just to make sure everything is fine.

Engine / Car

- Nissan Skyline R33 GTS25T 1993 Series 1 RB25DET Forged 2.6L

Modifications:

- K & N Pod Filter

- Cold Air Intake

- Forged Pistons

- Strengthen Conrods

- Blueprinted

- Balanced

- Port Polished

- Metal Head gasket

- Spitfire Coils

- High Performance Timing Belt

- High Performance Spark Plugs

- Gready Turbo Timer

Everything else is stock on the car at this stage, so stock ECU, stock boost etc.

Also, how much would I be looking at roughly? Cheers! :P

Link to comment
https://www.sau.com.au/forums/topic/152668-local-dyno-shop/
Share on other sites

Hmmmm, best sort out the ECU problem first, get a new one, PFC, HALTEC, name your price, then go for a tune, roughly for full tune, depending where you go, 500 and up, plenty of recommendations on tuners, matt spry down the g/c to allstar up north side zilmere, ones i know of, but plenty around but not to many decent ones that will do a decent job. but yeah, if your running stock ecu exhaust intercooler, maybe you should balance the list on which way you may like to go, best sus those out then move to a tune, to check if fine, as it has been rebuilt just remember it may be running on the lean side esp. because of the stock ecu.

Power runs are $55.00 and up at many dynos,

But it never hurts to get compression and leakdown test if you really want to check things out.

Cheers

A

Link to comment
https://www.sau.com.au/forums/topic/152668-local-dyno-shop/#findComment-2839789
Share on other sites

Aaron, you cant re-tune the standard the ECU as they are "self learning". I got my car put on the dyno at Allstar 2 weeks ago to check all the appropriate ratios and voltages. I would recommend that you look into getting a new ECU as this will enable you to change all the fuel ratios and timing.

Beacuse your car is an Auto you will need to look into getting a piggy-back ECU like an APEXI SAFC or EMANAGE/EMANAGE ULTIMATE or HALTECH. I have read that if you change the valve body in the auto then you can get a PowerFC but because they are not made any more then it might be hard to find one. My vote is for either the Emanage ultimate as they can adjust the timing or a Haltech. Talk to Richard at Allstar Tuning at Geebung ( www.atsperformance.com.au ) ans he will be able to help you out. Either that ot Matt Spry at the gold coast. There are also other places like Mercury Motorsport (talk to trent) and GT Autos at Newmarket/luttwyche that could give you pointers.

You already have the basis for a fantastic engine, now all you need to do is get some good hardware to go with it.

Cheers

Chris

Link to comment
https://www.sau.com.au/forums/topic/152668-local-dyno-shop/#findComment-2839852
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...