Jump to content
SAU Community

Recommended Posts

Kei Office coilovers to suit S13. Easy conversion into R31. These has less than 20,000 kms when pulled out of S13. Were perfect, no noise or leaks. I never got around to fitting into my car. SOLD!

covers4.jpg

covers3.jpg

covers2.jpg

covers1.jpg

Great Vigor BV1 nitro RC car. 1:10 scale. OS max 15cv engine, heaps of spares, spare engine, heaps of wheels, some foam, some rubber, 2 shells, mazda 6 and Commodore ute, fuel 1 month old, new glow plug, new fuel filter. remote, glow plug warmer the lot. Ready to run.

This entire setup cost me a fortune. Selling for $300 firm the lot, which is about a third of what it all cost new will not seperate.

rc1.jpg

rc2.jpg

rc3.jpg

rc4.jpg

rc5.jpg

rc6.jpg

rc7.jpg

Blaupunkt 12 inch sub. Model no TSw1200. 600w peak, 200w rms. Awesome sub. Transperant series. Looks awesome with lights behind it. It was in the car for about 4 months, was only used a few times as the car is not daily driven and then decided weight saving was the way to go! this is like new, somes in a sealed box with a grille to protect it from damage.

The sub was $220 new and box was $100. Selling for $150 the lot.

sub1.jpg

sub2.jpg

sub3.jpg

sub4.jpg

sub5.jpg

Universal seat rails, brand new, they dont fit any car in particular, but can be adapted to fit anything. There is a pair of rails. (2 seats worth) only 1 set in photo. $50 the lot.

seatrail.jpg

A set of Fully sick Chrome Auto pedal covers. Universal fit. Used. take em away $5.00

pedals.jpg

High energy sump, was made for an Rb26 into an R31. Will fit into VL, S13, R32/33 with an Rb26. Will bolt to all RB engines, but pickup may need work to fit other engines. It is the track spec baffled trap door sump. Looks better in person than in pics as pics were taken when it was dirty. Holds 7l of oil.

Cost me over $750 new in a group buy. Selling for $300.

Sump1.jpg

sump2.jpg

Sump3.jpg

Sump4.jpg

All parts in Ringwood area. Will prefer not to post. Prices are firm.

Edited by NismoR31Jet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...