Jump to content
SAU Community

For Sale (turbo, Injectors, Computer Etc..... Lots And Lots To Sell)

WITTIES
 Share

Recommended Posts

WITTIES Apprentice

WITTIES

Posted
Posted (edited)

Hey there im selling a few things of my RB20DET, as they are no longer needed... change of plans.

1. Custom fuel rail (blue) and Bosch 14mm 720cc injectors to Suit RB20DET, with speed flow fittings, and 10mm fuel hose only been on car for 200kms in A1 condition $1100.....

2. Mircotech LTX12s computer, with digital dash, and pnp adaptor only done 1000kms, suit all skylines paid $1850 selling for $1300.....

3. Garret gt2871 turbo serial number IEM104715g with RB25 rear housing machined out, stainless manifold, speedflow fittings, water and oil llines, silicone pipe of turbo, 4inch front pipe of turbo, K@N pod filter all done 1000 kays like new... turbo was $1750 alone selling whole package for $1750.....

4. Oil catch can with all fittings, hoses etc, polished finish with breather $200.....

5. Nismo 260km/h dash suit R32 skyline, with 80,000kms $300....

6. Rear pedders Adjustable, in A1 Conditon, no leaks etc come with c spanner road use 1500kms selling 4 $500....

7. Earthing kit with volt stabeliser $50...

8. Custom alloy radiator fitted to car but never drove with, suit R32 RB20 $300 pics up friday

9. Standard air box $30 SOLD PENDING PAYMENT

10. 3inch cat replacment pipe $50 perfect conditon SOLD PENDING PAYMENT

all parts come with original receipt

parts located on SA but will deliver aswell..

All these mods where safely tuned 236rwkw on a RB20DET but can make a alot more power, pulling them off as im selling the car, car will be sold with standard motor....

motor thats in car is avaliabe for parts etc aswell, as gonna just put a whole new motor/ gearbox package in, as it easier than fitting all thestandard stuff

post-35278-1171028004.jpg post-35278-1171028144.jpg post-35278-1171028283.jpg

post-35278-1171028399.jpg post-35278-1171028510.jpg post-35278-1171028610.jpg

post-35278-1171028711.jpg

^^^^ The car will be sold with a standard motor etc in the next few months so if anyone interested please pm me thanks... $16,000 firm

as you can see alot of $$$ spent on mods so no offers thanks prices are firm

thanks :P

Edited by WITTIES
WITTIES Apprentice

WITTIES

Posted
  • Author
Posted
would u consider 1000 COD for ecu and dash display and pnp? also do you have receipts for warranty purposes?

hey mate not willing to do cash on delivery.. sorry.. and $1000 is way to cheap for this unit prices are firm thanks....

r_speedfreak_r Proficient

r_speedfreak_r

Posted
Posted

does the microtech include ignitors or do you still use the original coilpacks? Does it come with EVERYTHING you need to install on an rb25?

WITTIES Apprentice

WITTIES

Posted
  • Author
Posted
does the microtech include ignitors or do you still use the original coilpacks? Does it come with EVERYTHING you need to install on an rb25?

hey mate, you use original coilpacks, and it a pnp system no easy instal PNP= plug and play system

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...