Jump to content
SAU Community

Recommended Posts

Up for sale is our R32 GTS-t, built by TRIAL tuning house in Japan, there isnt much this car does not have!

-RB25DET, the motor has been built, not sure on exact specs, I know it has metal head gasket, after market camshafts, forged pistons, ported head ect.

-RB25 Gearbox with OS Giken crossmission gearset

-OS Giken twin plate clutch

-KAAZ 2 way mechanical diff

-TEIN RA coil overs

-Adjustable castor rods

-TRUST TD06-20g turbocharger kit

-TRUST intercooler kit

-NISMO 555cc injectors

-NISMO fuel pressure reg

-SPLITFIRE coils

-BILLION aluminium radiator

-R33 GTR BREMBO front brakes

-R32 GTR front guards, bonnet and bumper bar

-WORK Meister S1 wheels

-TRUST 80mm exhaust system

-BRIDE drivers seat with Willans harness

-GTR passanger seat

-CUSCO roll cage

-GREDDY guages x 6

-Autometer RPM guage

-AP Engineering APEXI power FC

-HKS boost controller

-APEXI RSM

-VEILSIDE cluster

The car makes 280rwkw on a lowish 1.2bar, it has been very reliable and does not miss a beat, the car has current Victorian registration untill March 2007, it will be sold as is with no RWC if sold in Victoria for obvious reasons.

The car is now plain black and has no stickers on it.

Asking price for the car is $19000.

PMs will be replied to or you can E-Mail direct at [email protected]

post-35340-1171318082.jpg

post-35340-1171318526.jpg

post-35340-1171319311.jpg

Edited by Creatd Motorsports
Link to comment
https://www.sau.com.au/forums/topic/156108-sold/
Share on other sites

rb25 engine but rb20 gbox? i can understand if it has an rb20 gbox behind it if its got an os set in it... however since when is an rb25 pfc produced by AP?

do you maybe have it around the wrong way? rb20 engine and rb25 gbox with os set?

Link to comment
https://www.sau.com.au/forums/topic/156108-sold/#findComment-2906408
Share on other sites

rb25 engine but rb20 gbox? i can understand if it has an rb20 gbox behind it if its got an os set in it... however since when is an rb25 pfc produced by AP?

do you maybe have it around the wrong way? rb20 engine and rb25 gbox with os set?

no, trial built RB25, RB25 box with os giken internals. PFC is AP engineering and runs "psuedo" d-jetro. i think typo on box.

Edited by URAS
Link to comment
https://www.sau.com.au/forums/topic/156108-sold/#findComment-2906738
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Jax Tyres this Monday morning. Front lifted 15mm Back lifted 12mm Quote1, $175 per tyre + wheel alignment. Quote2, $660 inc wheel alignment. paid $298 for the lot.  
    • Finally have an update on this  Rack came in this week so I did a test fit. You do need the S chassis bushings since the rack is 5mm thinner than the R33 rack. The main issue I foresaw and ran into was one of the hardlines not lining up properly with there it's meant to on the rack. After some gentle coercing and bending very slightly, I managed to get it to fit without any kinks and keeping the hardline pretty much in all of the factory mounting positions. I did have to unbolt all of the soft mounts to move the line around so I could snake it out and bend it safely but it looks good to me for now. I'll update when the rack is fully bolted in and functioning.  
    • I hear this thread needs an update following its adventures last Wednesday!
    • What are you thinking makes a sequential shit to drive on the street? About the ONLY thing I can think of, is if you're wanting to be able to roll up to lights in third or second and pop it straight into neutral, or you want to come down two or three gears, say out of 5th and back to second, but they shift quick enough it doesn't really matter
    • I'm not a drag racing guy, but that was a good watch. Didn't Ibrahim's car have some cooch! But the big question is....WTF is with so many of them running without seatbelts!
×
×
  • Create New...