Jump to content
SAU Community

Recommended Posts

mate i honestly thought theyre ricey, until my mate got it with his tein super streets, it makes set up so much easier.. p.s his car is a daily and you can save 3 diff settings

personaly i now believe its worth it.

dead32

Thanks for the tip.. I'm thinking of getting Tein Super Streets my self, from what I hear they are a confortable ride, not as bouncy/rough as other coil overs out in the market and they also come with a decent price tag.

I'll take your word for it and will be ordering this controller along with the coilovers

mate i honestly thought theyre ricey, until my mate got it with his tein super streets, it makes set up so much easier.. p.s his car is a daily and you can save 3 diff settings

personaly i now believe its worth it.

Couldnt agree more!!!

Adjustable shocks are only worthwhile if you know what you are doing with the adjustments. Most of the time shocks have adjustment to cover up for their unsophisticated valving. This means they only work in a small range of conditions and so they have to have the adjustment. High quality dampers (Eg: Bilsteins) have very sophisticated valving and consequently have a large window that they operate well in. Simply put, they don't need adjusting.

:( cheers :laugh:

Adjustable shocks are only worthwhile if you know what you are doing with the adjustments. Most of the time shocks have adjustment to cover up for their unsophisticated valving. This means they only work in a small range of conditions and so they have to have the adjustment. High quality dampers (Eg: Bilsteins) have very sophisticated valving and consequently have a large window that they operate well in. Simply put, they don't need adjusting.

:( cheers :wave:

If a shockabsorber is that "great" and fine tuned, how can they cover such a wide range of work?

Yes i agree that bilstein are a very very good shock absorber. No arguement there. However, i feel maybe you should stop dismissing every other as "unsophisticated" and ultimately crap/useless.

The valve range on the Teins will work with the spring rates. Most kits can go up or down a rate and still be fine for most of the adjustment. E.g, if you went up a spring rate, you would find that the lower adjustment range would not give a great result, and down a rate the higher range of adjustments would not be great. Of course this all depends on other factors to, like bushes, swaybar thickness and settings (if adjustable), tyres (Road, semi-slick, slick). I run Tein Super streets in my car and race in several events (motorkhanas, hill climbs, events with tight twisty stuff where cornering and grip is worth more than brute power). My engine is stock, not big hp. My car is extremely competitive an often leads the class of other skylines and a range of other vehicles with big hp and suspension set ups like bilstein, Koni, or the jap stuff like HKS etc.

Just my thoughts based on my experience.

Not essential, but they are quite useful.

Unfortunately there's no way I can get access to the rear strut tops in my Z33 without drilling holes in the trim and rear strut brace; that's something I'm not prepared to do.

That lack of access meant that I had to get an aftermarket coilover kit that offered an in-cabin adjuster.

Mind you, Bilstein is about to offer an in cabin damper controller for their coilovers so perhaps you could wait, and then get suspension SK approves of that's also adjustable :(

If I drove a car where I could get access to the strut tops from the boot or by unclipping some trim that I can later re-clip then I wouldn't bother with a controller.

Not essential, but they are quite useful.

Mind you, Bilstein is about to offer an in cabin damper controller for their coilovers so perhaps you could wait, and then get suspension SK approves of that's also adjustable :(

HA HA yes i am sure he will approve of Adjustable suspension when it is available in Bilstein brand that he sells lol

Bilstein's Ride COntrol Cockpit Adjustable Coil-Over Kit

Not sure if they make the system available for any other cars (for example, Tanabe's ultra-funky speed sensitive TEAS is only available for the Sustec Pro SEVEN. And since that was developed in the USA and not Japan, its only available on cars available in the US.

If this thing didn't cost around AUD$1500 more than Tein Flex, I would have gotten it just for the gadgetness that is speed sensitive damper controlling. :(

Edited by scathing
Adjustable shocks are only worthwhile if you know what you are doing with the adjustments. Most of the time shocks have adjustment to cover up for their unsophisticated valving. This means they only work in a small range of conditions and so they have to have the adjustment. High quality dampers (Eg: Bilsteins) have very sophisticated valving and consequently have a large window that they operate well in. Simply put, they don't need adjusting.

:) cheers :)

How do you explain the Bilstein PSS9? These allow for damper ajustment and are considered to be one of the best in the market (valued at $4000). So are these lacking in sophistication?

:laugh:

How do you explain the Bilstein PSS9? These allow for damper ajustment and are considered to be one of the best in the market (valued at $4000). So are these lacking in sophistication?

:laugh:

HA HA HA yeah, they must be!!!

Let's put the quotes in the right context;

1. "Adjustable shocks are only worthwhile if you know what you are doing with the adjustments." How many people know which way to adjust the damping to increase the grip? Most just simply go for the “harder is best” at both ends. You experienced guys know that is most times NOT the case. Increasing the damping may in fact result in LESS grip. If I have an understeering condition do I increase the damping on the front? Or decrease it? What about the rear, increase or decrease? By how much? Without experience, not at all easy questions to answer.

Further complicating matters is the fact that damping adjustment is not a simple light switch operation. There are graduations and the effects of those graduations are on both front and rear and overall balance. So in a simple 12 step shock adjustment, front and rear, you can have 144 different settings. Which one is correct? For that day, on that track?

Painful experience tells me that you can spend many many hours testing damper settings, trying to find the ideal set up. The average guy on SAU isn’t going to have that sort of time or expertise. So they would be much better off with a shock that doesn’t need that sort of fine tuning. Spend the time learning the track and improving their driving skills. There is more likely faster lap times in doing that, than endless fiddling with shock adjustments. When they get a bit more experienced then try a simple 3 step stabiliser bar adjustment.

2. “Most of the time shocks have adjustment to cover up for their unsophisticated valving”. Note the use of the word MOST, that doesn’t mean ALWAYS. There are some shocks whose adjustment is a worthwhile addition. I regularly mention them in my posts, for example Ohlins (the Swedish ones), Sach, Proflex, DMS, Penske, Dynamic and Bilstein. Their cost will mostly likely exceed most of the budgets on SAU, so whilst they are aspirational, the reality is very very few will achieve that level of need.

Regardless of their budget, I still wouldn’t recommend even those brands to inexperienced guys.

3. The Bilstein B16 Ride Control kit is a re-active (self adjusting) kit and I certainly wouldn’t be recommending it for track use. Constantly changing damping characteristics is not something that drivers like, it makes it very difficult to pick the limit consistently. You should be demanding linear response to inputs, not unpredictable inconsistency.

4. I always get examples from guys in relation to their chosen brand of shock’s performance, the “I run XXXX and I beat everybody” claim. The fact is I have not seen one (not one) circuit race car in any class run Japanese shocks successfully. I can give you a tens of examples of cars that I have swapped from Japanese brand shocks to Bilsteins/Konis/Proflex/Ohlins etc that have achieved faster and more consistent lap times.

Most recently I completed the engineering on the S15 Group Buy kit. One of the test cars was previously fitted with Teins, and the driver had considerable track and set up experience with them over a couple of years of running. I replaced that suspension with the Group Buy kit and the car (no other changes, same driver) was 1.25 seconds faster at Wakefield Park. When we changed the Improved Production GTR to Proflex shocks it was 15 seconds faster over 12 laps at Oran Park, that’s the length of the straight. The equivalent in going from 8th place to 2nd place in an evenly contested field.

5. I should also mention that I don’t make any money from selling suspension, my income comes from engineering it. If I find a superior solution, then I will use it. For example in the S15 kit I am using Noltec front strut tops, not Whiteline, because they better suite the rest of the kit. When I was engineering the Skylines suspension Group Buy kits I tested many Japanese brands. They have a wide range, they look nice and shiny, they are readily available at reasonable prices. But I didn’t choose them, why? Because they simply didn’t measure up to my standards. After all I had to put my name to the kits.

In summary, I am simply putting forward my view point, based on my experience. Some people take head, others don’t, and that’s all right by me. My aim, after all, is simply to elevate the awareness on SAU of suspension and the various components and solutions available.

:laugh: cheers :w00t:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Comparison of the 2: Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
    • So, a bit of a side trip, but one that might be interesting for people with JDM cars and japanese head units. I know @Pac previously posted about a carplay/android auto adapter he installed which used the AUX input, and @V35_Paul put in one of the Tesla style units that replace both screens. The option I went with was a Lsait LLT-YF-VER5.87_2 (https://www.alibaba.com/product-detail/Lsailt-8GB-Android-Multimedia-Interface-for_1601187633672.html). Price was $1,150 for a single unit although they are much cheaper if you are willing to buy 2....$857ea. Make you you get the version 2 not version 1, it is faster and has a better UI - this is the manufacturer listing: http://www.lsailt.com/product/348.html. BTW if you've never bought from Alibaba before, don't be concerned....these guys can't stay in business unless they are responsive, ship fast etc, they were excellent (probably faster shipping than most local places) So, this was my task for a lazy Sat afternoon....looks complex but was all done in a few hours (it probably helps that I had some of it apart before so it was a bit familiar). I also decided to add a HD USB drive recorded at the same time and the unit also supports an aftermarket reverse cam (if you don't want to retain factory) and also AV in and HDMI out It looks much worse than it is, in fact in was genuinely all plug and play (no custom wiring at all). This video was pretty good (skipped a few steps), unfortunately they are an Aussie seller but no longer sell this unit (I guess Carplay/AA adapters are easier to install and much cheaper) https://www.youtube.com/watch?v=T5hJfYOB8Dg
×
×
  • Create New...