Jump to content
SAU Community

5 Stud Gtr Conversion.... R33 Rear. Blitz Pads, Handbrake Cables Etc.

GTR-026tt
 Share

Recommended Posts

GTR-026tt Collaborator

GTR-026tt

Posted
Posted (edited)

Blitz blue pads ( better then any pad you can get here, rated at high temp for heavy track work)

These pads didnt overheat with over 300kw,and 10 laps on race slicks.

Perfect upgrade for all S13's.

Comes with : R33 handbrake cables and brackets to fit on S13's etc.

R33 rear brakes,discs,shoes, etc. hubs etc.

front R32 GTR calipers with blitz bluestuff pads all around. $500 paid last year from japan

Machined rotors R33 GTSt.

hub's.

Basically its a full kit to convert your S13 to 5 stud, or even upgrade your standard R32 GTST stuff.

I can send it interstate,

All the stuff are located in cambelfeild where my car is at a workshop.

Edited by GTR-026tt
Link to comment
Share on other sites
nigelswazi Mentor

nigelswazi

Posted
Posted (edited)

What hubs does it come with?

What is included at the front S14/15 stub axels and hubs or the R32/33 stuff that doesn't fit a S13?

You describe it as a full kit so are S14/15 Control Arms included as the ball joint tapers are different and unsafe to use S13 balljoints on S14/15 stub axels?

Will make a offer pending answer

Edited by nigelswazi
Link to comment
Share on other sites
nigelswazi Mentor

nigelswazi

Posted
Posted
S15 hubs on front. R33 bolts straight up too.

Full BOLT ON KIT.

I used a nylock nut that cost me $5 each from any metric shop.

They will secure the stub axles to the control arms :O

No need for S14 control arms.

The taper is different and as such unsafe I recommend u swap the ball joint in your S13 control arms to R33 items if buying this kit. So do u include the stub axels aswell or just the front hubs? The S15 hubs don't fit onto S13 stub axels.

A pic of all included maybe a good idea then I will make u a offer.

Link to comment
Share on other sites
GTR-026tt Collaborator

GTR-026tt

Posted
  • Author
Posted
The taper is different and as such unsafe I recommend u swap the ball joint in your S13 control arms to R33 items if buying this kit. So do u include the stub axels aswell or just the front hubs? The S15 hubs don't fit onto S13 stub axels.

A pic of all included maybe a good idea then I will make u a offer.

Stub axles too , its a full kit as promised. ( sorry for the confusion - its allot of money to spend on a "conversion kit" so i guess you have all rights to post in here and ask heavy questions :O ) I appreciate it thou

You get everthing mate. so it DOES FIT. It came off my time attack machine.

The front fits fine on s13 front control arms, i had this setup professionaly checked out by TRENT from URAS and it is what he recomends.

It is a full kit, so thus means you buy it and wack it on your car.

The problem you mustv'e had is wrong parts matching. These where all matched proffesionally.

Please PM if your serious

Link to comment
Share on other sites
nigelswazi Mentor

nigelswazi

Posted
Posted
Stub axles too , its a full kit as promised. ( sorry for the confusion - its allot of money to spend on a "conversion kit" so i guess you have all rights to post in here and ask heavy questions :( ) I appreciate it thou

You get everthing mate. so it DOES FIT. It came off my time attack machine.

The front fits fine on s13 front control arms, i had this setup professionaly checked out by TRENT from URAS and it is what he recomends.

It is a full kit, so thus means you buy it and wack it on your car.

The problem you mustv'e had is wrong parts matching. These where all matched proffesionally.

Please PM if your serious

Nah mate I didn't have wrong parts matching champ I have install heaps of these but as a engineer I know the safety issues of wrong tapers etc as there is a slight bit of play. Just change the ball joints at pedders for $100 and its all sweet. Let me know if not sold im interested in it.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Sleepergm
      Max horse power stock internals?

      By Sleepergm · Posted

      And yes would be going to tomei Japan for sure as it’s closer to me … 
    • Sleepergm
      Max horse power stock internals?

      By Sleepergm · Posted

      Yeah I heard the same. Might be hard to order one. But then I guess can go to hks or go to a more expensive n1 block with tomei. Guess will jump the hurdle once I get there next upgrade around. I can’t get work done in the states as the lead time will take for ever on top of shipping to Hong Kong. 
    • joshuaho96
      Max horse power stock internals?

      By joshuaho96 · Posted

      https://www.platinumracingproducts.com/en-us/products/nissan-rb26-cast-blocks This is the solution I was thinking of. I would stay away from Tomei USA, their quality is a question mark to me. If you want an engine machined in the US contact Club DSPORT: https://clubdsport.com/ Tomei JP is probably fine but I recall they stopped doing pre-assembled short or long blocks. In general it's pretty tough to get any kind of RB26 block at the moment with Nissan so severely backordered.
    • joshuaho96
      Nismo front and back LSD

      By joshuaho96 · Posted

      PAR specifically offers stock ratios in their gearset and you could do whatever ratios are physically possible supposedly for no extra cost. I agree 6 ratios is better than 5, the factory 2nd gear is equivalent to the Getrag 2nd gear if you account for the differing final drive ratio though. The Getrag 3rd gear with a 3.916 final drive is equivalent to a 1.6 2nd gear in the FS5R30A. I'm about to swap the transmission out on my car, I'm tempted to send the one I have now out for rebuild with the standard "cross ratio" gearsets out there to see if it really makes such a big difference the next time I pull the transmission.
    • Sleepergm
      Max horse power stock internals?

      By Sleepergm · Posted

      This is what I was looking at next:  https://www.z1motorsports.com/engines/tomei/tomei-rb26-28l-short-block-assemblies-p-45479.html as we can’t bore the cylinders out in hk so better just buy the whole lot in one and install then retune. Everyone saying the weak link are the bolts holding the rods together. I already did valve springs, arp head bolts, hks racing coils, nismo fuel pumps and pressure regulators, injectors etc for the top of the engine. 
×
×
  • Create New...