Jump to content
SAU Community

Fs: As New Clutch To Suit R33 Or Vl Commodore

sl33py
 Share

Recommended Posts

sl33py Mentor

sl33py

Posted
Posted (edited)

Barely used (200kms) clutch to suit R33 or VL Commodore for sale. $300 ONO. Selling because of a major upgrade path I've decided on just days after the clutch was put in.

I'm not 100% sure of the brand, but believe it's either a Daiken (Exedy) or a PVR. The guy at Dynotune Belconnon who installed it has the exact same clutch in his R33 with a high-flow and ~220rwkw, and it's been running strong for ages now with no issues. Only reason I'm selling it is for the reason above and I'm super paranoid and want everything way uprated and overkill for the upgrades. The clutch has 200-300kms on it at most, so it's pretty much new.

In case your interested, my car is currently stock except for the exhaust, 150rwkw and driven pretty sedately. Knowing that the clutch will be swapped out shortly, I've been babying it to keep it in best condition. Some have said to me noone buys a second hand clutch, but since its literally got days on it I think it's a slightly different situation. And for the price I think it's worthwhile for someone even just as a backup.

Best way of contacting me is by mobile: 0404 896 713, or PM. I'm in the ACT and pickup or near(ish) delivery works best for me, but if you want it shipped I can look into it, buyer would pay shipping costs. Keep in mind it's not actually out yet, but you can let me know you're interested and I can get back to you asap.

I can link to my 100% positive eBay feedback if requested and you can see my trader rating on here (small, but good :w00t: ).

Turn my loss into your gain!

Cheers.

Edited by sl33py
  • 1 month later...
  • 11 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      What accelerator cable can be used with greddy plenum

      By Duncan · Posted

      I was 99% sure the standard one is long enough to get there, you might just have to change the throttle orientation. If not, I remember someone having used an r31 cable instead, but that is probably harder to find than r33 by now...
    • V36
      What accelerator cable can be used with greddy plenum

      By V36 · Posted

      HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
×
×
  • Create New...