Jump to content
SAU Community

Recommended Posts

NB: As From Between the hours of last night till today sometime, A moderator had moved/merged my "original" thread about this with the other one forgetting to mention without permission so had to re-create this one. Let The other thread die, all information will be contained with this first page and this thread from here on, Thankyou. At least you can see all the details on this first page. And will keep this updated with information and people interested aswell.

Thankyou.

Adam

As discusions from the last sunday cruise that i organised, its time to be different.

Regular Meeting Place: Crazy Clarks Springwood

Time: At this moment 12:00pm for 12:45 Depart

Im hoping to get these two different photos in of style at the place at least one will work fine the other is space dependand at this stage, Also i will present people with another offer here as well. But details of this will be mentioned outside here :)

Destination:

1. From here first stop is yatala BP for those that need/want food or fuel

2. Head down to the BW carpark for a special organised photo shoot (Hope someone has a good lense) and hopefully we can capture and set a new style of photo here (This will be replicated on a later date as well in a larger area but im sure we can get away with it.)

3. Head down to the Spit to relax bring a rug or chair if we are to sit for a little while.

4. Just up the road from the spit is a nice pub. Here we can get some food and drink (Last sunday cruise beer battered Fish and chips was $7.00)

Sit down and relax and just talk general crap :laugh: lol as we do now and then

5. To be made at this stage, but a leisurely cruise up tambo maybe instore here but its time and user discretion on this matter.

6. Head home to do what ever we do at home.

What Are we doing: Driving from crazys heading South at this stage, from here we shall organise a photo shoot with some difference. Much different to the ones that have been posted on previous events. People its time to think outside the box of straight line shoots :) This will also be decided soon enough as im arranging a few things with a couple of others on ideas.

From this at this stage we need as many as we can, up and above 12 -15 +

From here we shall end the day with a meal. Then either two choices cruise home or maybe a cruise up tambo we will see.

What you need to bring: Good Behaviour smile.gif, Money, Petrol in your car. Camera if you have one. Shiny car. yes that means get out that Wax of yours wash and wax your car, i want Shiny tongue.gif.

This is open to All skylines, 33's 34's and oh 32's.

The photo planing we are doing i havent seen a photo like it yet, But cannot give any more details than that at this stage as this is going through some planning on this one.

So please post your interests. and watch this space for finer details

Cheers Guys

Adam

Attendees so far:

People attending inc maybe's:

n15m0

Devils_Advocate21 (Myself)

redevil

lambo32

Anakha

Ad_N

510rav (Maybe Spit only maybe)

Hotr34

Grrr

GemR33

Ben094 (numberplate ref)

IanB

R33Ben

AARR34

17SOK(maybe)

pear (maybe)

japtaxi

70YRB

GtrVspec

Scadtional

POQ123

Ryan.R34

heist33

Total 21 Cars So far :D this is good

I hope some1 is still reading this. What's the address for Crazy's? the one at Cnr Mains Rd & McCulloch St Sunnybank ?

springwood...

next to springwood maccas

sorry guys im a no go for BW at this stage :rofl:

but ill be down the spit

arg runnign a bit late hopefully be there b4 you all leave.. can we please have someones number in case we miss you so we can catch up??

^^^ :rofl::rofl:

they should have a number for us slow ones that are still recovering....anyoyne guess where bouts they could be bout nowish...or should i jus c em at the spit

cheers

was a hot day..and was so good seeing so many skylines..well done SAU

i did a photoshoot the other night and had my ISO on 1600, for those of you that know a slight bit about cameras..ISO1600 suits night atmosphere. upon completing my photoshoot i forgot to return my ISO back to 100 therefore the camera was still in its night setting! and as a result..all of my photos today were overexposed! hardly any of them turned out..but i thought id still put a few up..i suppose a few shitty photos is better than none!

ps nice to meet you john :huh:

18-03-2007016.jpg

18-03-2007017.jpg

18-03-2007019.jpg

18-03-2007023.jpg

18-03-2007026.jpg

18-03-2007027.jpg

18-03-2007030.jpg

18-03-2007031.jpg

18-03-2007034.jpg

18-03-2007050.jpg

18-03-2007053.jpg

18-03-2007058.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...