Jump to content
SAU Community

Ebay Dump Pipe Questions

r33madd

By r33madd,
in Engines & Forced Induction

 Share

Recommended Posts

bluey33 Experienced

bluey33

Posted
Posted

Havnt heard of anyone with one...

IMO I would just go with a proven performance dump.

I myself am looking at gettin front/dump and have chosen to spend the little bit more for the more popular chosen ones that have been proven to perform.

Be interesting to see if anyone has one of these and their thoughts

RANDY Veteran

RANDY

Posted
Posted

I have the full split dump and front pipe in one, made by (I think) foolboost (on SAU). I don't think he was on SAU when he was selling them on ebay, but his look totally like the ones that were on ebay at the time. I had him make one pretty identical to BATMBL's one... that is, with the eyebrow seperating the wastegate chamber from the main exhaust outlet.

Sooo... if this is for your GTST, i'd recommend getting something like that... a full dump and front pipe in one, rather than have two pieces bolted together. I guess if you have a 3" front pipe, this part will be cheaper to buy, and you can swap just that section out if you change your turbo down the line...

Otherwise, I *LOVE* my front/dump pipe. =-D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sonicii
      Steering lock/control unit Infiniti G37

      By sonicii · Posted

      Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
×
×
  • Create New...