bluey33

Give my mate Jack a txt/call - 0424999936 He may have one.

You need box tailshaft as well? List everything you need and I will tell you what I got and how much.

$120 VIC

Rapid flow... PM details please

Location? Price?

What ecu has it got?

Got 3" bellmouth front-dump pipe and 3" cat. (very hi flow) Txt me if keen 0438096063

Did you end up getting an A/C hose? I might have one if ya didnt.

Can't seem to upload them from mob. My number is there. Give me a txt and will send some through

Bump. Taking offers. Or will trade for 6boost/brae

Got one. Send me a txt for more info. Can send pics etc. 0438096063

Melbourne to Brisbane done over 4 weeks. 7,500-8,000km done in total. Started off with 350 to the tank but fixed that whilst away and was getting 550-600. Would do it again but in saying that next time would love to take 4x4 and go more places and do more camping. (So not with the mrs next time lol) Hotels and cabins get expensive along with 98 fuel.

Have a cast low mount HKS exhaust manifold with a HKS wastegate and screamer pipe with flange so it can be plumbed back into exhaust. Will Try and get pics up ASAP. Text me for pics and offers 0438096063 Chasing $1000 Located VIC

Factory diff housing has sticker. Good luck of its still there. Also check compliance plate to see if it has trans axle code. If there should be HA, HB etc to HF HC is H165. Then you need to choose your ratio that you want compared to what you have. These are the ratios as far as I know. 3.364 3.545 3.700 3.900 4.111 4.375 4.625 4.875

H165. 3.9 ratio. Whole rear end just missing one brake caliper. Located ln VIC.

'You will be fine' is pretty positive. Stop being a bitch and get stuck into it.

You will be fine. Smash it all together.

Chasing a seal kit to re-seal/rebuild my 180sx rack. Anyone bought one? Where from? Tried 2 steering joints that rebuild racks in Melbourne. Both can't get kits due to being an import apparently. Also tried eBay but no luck. Or has anyone had their rack rebuilt? If so by who? Thanks

Thanks!!

Engine is out as I'm painting car ATM. I have heard of some turbos on the hks manifold causing people to trim the engine mount. If i was to run a G3 or similar turbo would the gains be worth the price of a brae manifold taking in mind I have the hks manifold and got it for virtually nothing or do you think sell and upgrade? Cheers.

Hypergear... I saw you are a selling a hks cast manifold. Any chance of fitting a kando t67 on it or your ATR43-g3? I got a hks cast manifold off a mate but thinking of selling to run a brae manifold due to what I have heard about them. Running rb25 in 180sx.

Find another mechanic. Also play in steering wheel could be steering column spacer bush.

Should go on back of air regulator or whatever it's called. It is the square looking thing with green sticker on it just above and to the right of the plug. Don't know what the setup is with the 30/25 though. That air regulator is also missing a hose which goes back to idle control on back of factory intake manifold.

Sweet. PM me price, location and mobile number if ya can.

Also chasing r32 gtst BMC