bluey33

Rear strut brace Air box and snorkel Front seats Steering wheel All sold pending payment. Also have white bootlid with series 2 spoiler - $150 Both tail lights (white) - $20 each Rear bar (white) - $100 Boot trims available (not base)

RH skirt rooted. LH you can see in pics. Free to good home.

Stripping white manual r33 gtst. Let me know what your after. Most parts here. NOT selling: Engine (but do have a blown engine for sale) Gearbox Cluster ECU & loom Brakes Tailshaft Rear cradle,diff, arms, shafts. Parts from front end destroyed. Bonnet, radiator, condensor, front bar, headlights, rhf quarter, rhf strut. FOR SALE: Airbox with snorkel $120 S1 bonnet (straight as just clear pealing off) - $80 LHF quarter in white - $100 Blown (3rd cylinder 0psi) RB25DET as you see in pic below. $350 Front strut brace 'Juran' $75 Blitz 3" catback - 89Db with full zorst. Stainless just needs a polish (you can see in pics where I polished it up to show condition under all the crap $300 LH door $150 with door trim RH door $150 with door trim Interior Trims - make offer or ask. Steering wheel - $50 Climate control unit- $20 Front seats - $50 each Rear seat base and back - $50 Seatbelts - $20 each Genuine floor matts (all 5) - $70 Carpet - $50 Feel free to make offers. More parts there so just ask. Located Ballarat. Can meet west melbourne depending on parts bought. Will post also.

Tried mine on street, at DECA and on rally car. If you got a good surface, it wont come off. How high speed you talking? Rally car hits 200km/h on dirt.

I got one from s1 gtst. Replaced engine which came with one on it. Located Vic.

Maybe cause Evo's that gravel rally throw 15's on and downgrade caliper size and you don't see gtr's rallying. My theory lol

Where you located perry? Got one in Vic.

I had the same issue whilst drifting. Car would cut out on entries and all the lights would come on dash for split second then it would come back to me. Caused a lot if straightening and frustrating. Wouldnt as such surge/splutter and carry on. More just cut out and turn back on within a second or so. Even did it with full tank. Changed fuel pump still no different, checked earths all seemed fine. Never got to the bottom of it.

Ben just make sure your fuel breather to charcoal canister is fine. Then vent charcoal canister to atmosphere. (block off vacuum lines at engine of course) See if that fixes it temporarily. That's what I did as I was interstate when I had issues. Had plans to fix it but still venting to atmo.

Look up member 'Filipovic' just had headlights up for sale

How much u want pre paint job with no motor?

Put pics up of what you have. All parts of the shifter. Then we can tell you if anything is missing.

I got one in average condition. Needs paint and small repairs on little cracks. Just sold one in good condition couple weeks ago on eBay though.

There is 16 for sale on car sales in victoria. It's a good start.

Got someone interested in complete car ATM. If he does not buy, it will go on eBay for 5 days, if it does not sell there I will strip it. Cheers.

I'm with artz on this. If u can take week or so off go NSW. If not halls gap or GOR. Mrs and I had month off in april and went melb - QLD. Did spur, warburton/ baw baw, kozcioisko NP, blue mountains, royal NP (Sydney), Macquarie pass then several good directed through SE QLD. Lamington NP and murwullimbah etc Over 7000km of driving and had a ball.

Bump before going eBay. If does not sell on eBay will strip car.

Selling my white 1994 r33 gtst 5 speed manual. Have owned car 6 years. Vehicle has structural damage to RHF area of the car. Has no rego and not legally documented as a write-off. Has 170,000km, full exhaust, boost gauge, boost controller, exedy clutch and drove fine up until accident. Can still hear it running. I am looking to sell it complete for $3000 ***** I AM NOT STRIPPING CAR AS OF YET!!!***** do not txt asking if I have a part for sale. Car is located in Ballarat, VIC and I can be contacted on 0438096063 for pictures. I Can not load pictures off I phone on here.

Hard to explain but at headlight side mOunting the bolts are offset opposite way and also NA air box bases don't give room for factory intercooler piping.

I got a series one type m front bar. Txt/call me for price etc 0438096063

Series one or two?

Turbo and non turbo are different incase u don't know

question... If a mechanic happens to write a RWC for a RB25 in a S Chassis. Whats stopping it going through? Say you get a dumb inspector at vicroads who identifies engine number on block to RWC engine number and thinks nothing of it as it has nissan on the coilpack cover? Do you manually put in details on computer and it won't 'allow' to have an 'RB' engine code put in or could it be overlooked?

location?

I dare say Lower control arm, castor rod and rack end will all be f**ked. I would be replacing alll these anyway (cheap) and then get W/A to see how she comes up. Check if bearing is now noisy too