Jump to content
SAU Community

Recommended Posts

i'm using a microtech in my 34 gtt at the moment. It's pretty much as they say, a bit rough in the low revs and can be a bit heavy on the fuel.

At the moment i have 250 rwkw and for every 45 litres i throw in i get about 300 km (flog it here and there but mostly highway driving). Not the best fuel economy i've seen.

Would probably go the power fc if you can. The only reason i went microtech is because that's what my tuner prefers to use.

Link to comment
https://www.sau.com.au/forums/topic/163005-microtech/#findComment-3025367
Share on other sites

i got a microtech in my 32 GTR

and i am getting 400k's to about 60L and im still to truely finish tune (bit rich for now)

so a little over 300rwhp and approx 15L/100k

true not as good as Power FC in economy as no closed loop

but is by no means BAD fuel economy

ECU choice should all depend on tuner

RellikZephyr

Link to comment
https://www.sau.com.au/forums/topic/163005-microtech/#findComment-3026065
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yes. It's not aesthetically pleasing. And most turbos sold these days are sold for aesthetic purposes (Insta likes/fame, etc). Also its cheaper to not machine it. The hot side is the pipe with hot air in it from the turbo to the intercooler. The cold side is the pipe with cooled air in it from the IC to the engine. Anywhere after the turbo will do. Certainly before the IC is better than the IC. But there is no massive imperative to get it from the turbo scroll itself, or from no more than an inch downstream. Those are nonsense thoughts. The only thing we want is a pretty honest measurement of the pressure at the turbo outlet, and anywhere from the compressor housing itself to the inlet of the IC will read approximately the same thing. Yeah, I disagree with Tao on that one. It's fine for an engine that only runs on the dyno at full throttle (or, equivalently, a drag car that only really runs at full throttle also). But some turbos that are particularly sensitive to overspeed (ie EFRs) would quite possibly get into a lot of trouble if run that way.
    • The sarcasm should have been easily visible. It was dripping off it.
    • Whether the brakes will clear the back of the spokes comes down to the specific wheel, as well as its dimensions (ie 18x8 or whatever else size). You can have 2 different wheels of the same size and one will clear and on the other the spoke design will not clear. So your question "Anyone riding around with 18 inch. that can confirm "that it'll fit"?" cannot be answered in a meaningful way. You need that person to be using the same wheel you want to use.
    • I didn't even bother watching the video.
×
×
  • Create New...