Jump to content
SAU Community

Recommended Posts

1990 r32 GTR Rolling Shell

The GTR has:

• Kei office coilovers

• 17" ROH mags

• Tyres are 255 rear, 235 rear.

• DBA front slotted rotars, new bandex pads all round - I bought the rotars new when car was complied, done very little kms.

• Aftermarket steering wheel, gear knob, pedels.

• Recaro front seats

• Touchscreen TV/DVD player, also a mini disk player. - new pioneer speakers in doors and parcel shelf.

• Tinted windows - done at tintacar, been under a car cover most the time.

• Turbo timer

• new window sils

• Bosh 044 fuel pump installed - new, got installed before dyno run.

• Hicas lock bar

• bonnet pins

• Nismo dash 133xxxkms

The GTR needs:

engine, resistor pack, ecu, clutch/fly, radiator, cat and exhaust.

You can get all of this for about 6-7k plus the motor will have a warrenty

so you can get this GTR for about 16k with a warrenty on the motor!

I have a HKS stainless steel catback, Hiflow cat, Exedy clutch, billit fly and radiator for sale too.

$9400

Somebody has to want this at this price

North bris

Edited by druzilla32
Link to comment
https://www.sau.com.au/forums/topic/163054-r32-gtr-9400/
Share on other sites

getting to the point where you should get a highly modded race only import and put the engine from that in this... then sell as many bits off the other one as possible and the rest to the wreckers... the thought must have crossed your mind...

very very cheap

Link to comment
https://www.sau.com.au/forums/topic/163054-r32-gtr-9400/#findComment-3028325
Share on other sites

getting to the point where you should get a highly modded race only import and put the engine from that in this... then sell as many bits off the other one as possible and the rest to the wreckers... the thought must have crossed your mind...

very very cheap

yeah its a great idea and I have thought about it.

Seems nobody wants to wait a month to get a motor put in and tuned.

May need to get a motor in it myself just to sell it..

PS.. If somebody gives me a deposit I can get a motor put in it for you.. but the car will be 22k with the motor (may aswell do it yourself and save 6 grand eh? )

Link to comment
https://www.sau.com.au/forums/topic/163054-r32-gtr-9400/#findComment-3029984
Share on other sites

  • 1 month later...
  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...